HYRIG can supply compatible replacements for the NOV power slips range. The PS21 and PS30 are hydraulic floor-mounted power slips designed to grip drill pipe, drill collars, and casing during drilling and casing running operations.
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
| Parameter | PS21 Compatible Replacement | PS30 Compatible Replacement |
|---|---|---|
| Load Rating | 500 sTon (454 Tonne) | 1,500 sTon (1,361 Tonne) |
| Pipe Size Range | 2⅜–14 in. (60–356 mm) | 2⅜–20 in. (60–508 mm) |
| Maximum Torque | 45,000 ft-lbs (61,020 Nm) | 55,000 ft-lbs (74,580 Nm) |
| Rotary Size | 37½ in. (953 mm) | 49½ in. (1,257 mm) |
| Hydraulic Pressure | 2,300–2,500 psi | 2,300–2,500 psi |
Data source: Technical data and parts list.
| Parameter | PS21 Compatible Replacement | PS30 Compatible Replacement |
|---|---|---|
| Weight w/o Slip Assembly | 4,800 lbs (2,160 kg) | 7,800 lbs (3,510 kg) |
| Flow Rate | 10 gpm (38 l/min) | 10 gpm (38 l/min) |
| Return Line Max Pressure | 200 psi (1,379 kPa) | 200 psi (1,379 kPa) |
Explore specific models for size charts and components: NOV PS21 Compatible Replacement and NOV PS30 Compatible Replacement.
| Dimension | PS21 Value | PS30 Value |
|---|---|---|
| For Rotary Size | 37.1/2 in. | 49.1/2 in. |
| Pipe Size Range | 2.3/8 - 14 in. | 2.3/8 - 20 in. |
These compatible replacements use a hydraulic cylinder to drive the slip segments against the pipe. Power-down slips react torque independently of string weight. The insert carriers feature a quick-change design with no loose bolts or pins.
Looking to replace your existing NOV power slips? Check these points before ordering:
These replacements are used with rotary support tables (RST), driller’s console control panels, and power slip frames.
Used to grip and suspend the drill string or casing string during drilling, tripping, and casing running operations.
Disclaimer: HYRIG supplies lifting equipment for industrial applications. Please verify local safety regulations and request valid certification documents before use. Never exceed the rated load capacity.
Not sure which model fits your rig? Tell us your maximum pipe OD, expected string weight, and rotary table size. Our engineers will verify the correct replacement before you order.
Replacement insert carriers and inserts are available. See the full list at NOV Power Slips Parts.
Q: Are these original NOV power slips?
A: No. HYRIG supplies independent, compatible replacement products and is not affiliated with NOV.
Q: Will the PS30 replacement fit my existing NOV setup?
A: Yes, it is designed as a drop-in replacement for standard NOV PS30 configurations. Verify your insert carrier number before ordering.
Q: What is the maximum torque of the PS30 replacement?
A: The PS30 compatible replacement reacts up to 55,000 ft-lbs (74,580 Nm) of torque.
Q: What is the typical lead time for a replacement power slip?
A: Lead time depends on configuration. For urgent downtime, contact HYRIG with your model and required part numbers for a confirmed delivery estimate.
For NOV power slips compatible replacements, contact HYRIG: info@hyrig.com
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.