NOV PS21 Power Slips Compatible Replacement | 500 sTon

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply a compatible replacement for the NOV PS21 hydraulic power slips. The NOV PS21 is a hydraulic floor-mounted power slip rated at 500 sTon, designed to handle 2⅜–14 in. pipe.
Conatct For Details
DetailReview(0)Additional

NOV PS21 Power Slips Compatible Replacement | 500 sTon

HYRIG can supply a compatible replacement for the NOV PS21 hydraulic power slips. The NOV PS21 is a hydraulic floor-mounted power slip rated at 500 sTon (454 Tonne), designed to handle 2⅜–14 in. (60–356 mm) pipe.

NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.

Key Facts

ParameterCompatible PS21 Replacement
Load Rating500 sTon (454 Tonne)
Pipe Size Range2⅜–14 in. (60–356 mm)
Maximum Torque45,000 ft-lbs (61,020 Nm)
Hydraulic Pressure2,300–2,500 psi
Flow Rate10 gpm (38 lpm)
Weight (w/o slip assembly)4,800 lbs (2,160 kg)
Rotary Size37½ in. (953 mm)
Replacement CompatibilityReplaces NOV PS21 configurations

Data source: Technical data and parts list.

PS21 Compatible Specifications & Size Components

Insert Carrier No.Clamping Diameter (in.)Rating (sTon/Tonne)Insert PNThroat Opening (slips up, in.)
#113.5/8500/454265513.1/2
#213.1/2500/454265213.1/4
#311.7/8500/454265116.1/2
#410.3/4500/454263715.3/8
#57.5/8470/425263314.1/2
#65.1/2500/454217010.3/4

Need a higher load rating? Explore the NOV PS30 Power Slips Compatible Replacement. For full series, see NOV Power Slips Compatible Replacements.

Data source: Technical data and parts list.

Dimensions & Hydraulic Requirements

ParameterCompatible PS21 Value
Rotary Size37½ in. (953 mm)
Pipe Size Range2⅜–14 in. (60–356 mm)
Weight without Slip Assembly4,800 lbs (2,160 kg)
Maximum Torque45,000 ft-lbs (61,020 Nm)
Hydraulic Pressure2,300–2,500 psi

Structure / Working Principle

This compatible replacement uses a hydraulic cylinder to drive the slip segments against the pipe. Power-down slips react up to 45,000 ft-lbs of torque.

Cross-Reference & Replacement

Looking to replace a NOV PS21? Check these points before ordering:

  1. Load rating: PS21 = 500 sTon. If your loads exceed this, consider the NOV PS30 Compatible Replacement.
  2. Rotary table size: Verify your rotary support table is 37½ in.
  3. Insert carrier compatibility: Match the carrier number to your pipe OD.

Compatible Host Models

Used with Rotary support tables (RST) with 37½ in. size and driller’s console control panels.

Applications

Used to grip and suspend the drill string or casing string during drilling, tripping, and casing running operations.

Disclaimer: HYRIG supplies lifting equipment for industrial applications. Please verify local safety regulations and request valid certification documents before use. Never exceed the rated load capacity.

Selection Support

Not sure if this compatible replacement will fit your NOV PS21 setup? Tell us your maximum pipe OD and rotary table size. Our engineers will verify the insert carrier set before you order.

Spare Parts

Compatible replacement components for the NOV PS21 include Insert Carriers and Inserts. See the full list at NOV Power Slips Parts.

Frequently Asked Questions

Q: Is this an original NOV product?
A: No. HYRIG supplies independent, compatible replacement products and is not affiliated with NOV.

Q: What is the maximum torque of the PS21 replacement?
A: The PS21 compatible replacement reacts up to 45,000 ft-lbs of torque.

Q: Can I use this PS21 replacement on 20-inch casing?
A: No, the PS21 is rated for 2⅜–14 in. pipe. For 20 in. casing, use the NOV PS30 Compatible Replacement.

Q: What is the typical lead time?
A: Lead time depends on configuration. Contact HYRIG for a confirmed delivery estimate.

Contact

For NOV PS21 compatible replacements, contact HYRIG: info@hyrig.com

NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit