HYRIG can supply a compatible replacement for the NOV PS30 hydraulic power slips. The NOV PS30 is a hydraulic floor-mounted power slip rated at 1,500 sTon (1,361 Tonne), designed to handle 2⅜–20 in. (60–508 mm) pipe with up to 55,000 ft-lbs (74,580 Nm) of torque.
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
| Parameter | Compatible PS30 Replacement |
|---|---|
| Load Rating | 1,500 sTon (1,361 Tonne) |
| Pipe Size Range | 2⅜–20 in. (60–508 mm) |
| Maximum Torque | 55,000 ft-lbs (74,580 Nm) |
| Hydraulic Pressure | 2,300–2,500 psi (15,858–17,237 kPa) |
| Flow Rate | 10 gpm (38 lpm) |
| Weight (w/o slip assembly) | 7,800 lbs (3,510 kg) |
| Rotary Size | 49½ in. (1,257 mm) |
| Replacement Compatibility | Replaces NOV PS30 configurations |
Data source: Technical data and parts list.
| Insert Carrier No. | Clamping Diameter (in.) | Rating (sTon/Tonne) | Insert PN | Throat Opening (slips up, in.) |
|---|---|---|---|---|
| #1 | 16 | 750/680 | 2635 | 20 |
| #2 | 14 | 750/680 | 2635 | 18 |
| #3 | 11⅞ | 750/680 | 2651 | 16 |
| #4 | 10¾ | 750/680 | 2637 | 15.3/8 |
| #5 | 7⅝ | 750/680 | 2633 | 14.1/2 |
| #6 | 6½ | 750/680 | 2173 | 13.1/4 |
Explore the lighter-load replacement: NOV PS21 Power Slips Compatible Replacement. For the full series, see NOV Power Slips Compatible Replacements.
Data source: Technical data and parts list.
| Parameter | Compatible PS30 Value |
|---|---|
| Rotary Size | 49½ in. (1,257 mm) |
| Pipe Size Range | 2⅜–20 in. (60–508 mm) |
| Weight without Slip Assembly | 7,800 lbs (3,510 kg) |
| Maximum Torque | 55,000 ft-lbs (74,580 Nm) |
| Hydraulic Pressure | 2,300–2,500 psi |
This compatible replacement uses a hydraulic cylinder to drive the slip segments against the pipe, matching the operating principle of the original NOV PS30. Power-down slips react up to 55,000 ft-lbs of torque. The insert carriers feature a “drop and lock, pull and release” design.
Looking to replace a NOV PS30 or upgrade from a PS21? Check these points before ordering:
Used with Rotary support tables (RST) with 49½ in. size, driller’s console control panels, and casing running operations with 2⅜–20 in. pipe.
Used to grip and suspend the drill string or casing string during drilling, tripping, and casing running operations.
Disclaimer: HYRIG supplies lifting equipment for industrial applications. Please verify local safety regulations and request valid certification documents before use. Never exceed the rated load capacity.
Not sure if this compatible replacement will fit your NOV PS30 setup? Tell us your maximum pipe OD, expected string weight, and rotary table size. Our engineers will verify the insert carrier set before you order.
Compatible replacement components for the NOV PS30 include Insert Carriers (e.g., 202443-963) and Inserts (e.g., 2635, 2633). See the full list at NOV Power Slips Parts.
Q: Is this an original NOV product?
A: No. HYRIG supplies independent, compatible replacement products and is not affiliated with NOV.
Q: Will this replacement fit my existing NOV PS30 power slip frame?
A: Yes, it is designed as a drop-in replacement for standard NOV PS30 configurations. Verify your insert carrier number before ordering.
Q: What is the load rating of this compatible PS30 replacement?
A: It is rated at 1,500 sTon with a 2⅜–20 in. pipe range.
Q: How do I choose between the PS21 and PS30 replacement?
A: Choose the PS30 replacement for 20 in. casing or loads approaching 1,500 sTon. Choose the NOV PS21 Power Slips Compatible Replacement for 14 in. casing.
Q: What is the typical lead time for replacement insert carriers?
A: Lead time depends on carrier size. For urgent downtime, contact HYRIG with your carrier number and quantity.
Q: Is this a lifting product that requires special certification?
A: Yes, it is a load-holding lifting tool rated at 1,500 sTon. Verify local safety regulations before use.
For NOV PS30 compatible replacements and spare parts, contact HYRIG: info@hyrig.com
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.