Overhead Reflux Pump | API 610 OH2 Centrifugal Pump | China OH2 Pump Manufacturersingle-stage, overhung pump for overhead reflux service in distillation columns. Low NPSHr, high temperature capability (up to 400°C), handles light hydrocarbons. Back pull-out design. China OH2 pump manufacturer.

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
API 610 OH2 single-stage, overhung pump for overhead reflux service in distillation columns. Low NPSHr, high temperature capability (up to 400°C), handles light hydrocarbons. Back pull-out design. China OH2 pump manufacturer.

Conatct For Details
DetailReview(0)Additional

An overhead reflux pump is a critical component in distillation towers (fractionators, crude columns, FCC main fractionators, etc.). It circulates condensed overhead liquid back to the top of the column to control temperature and product purity. This service demands a pump that can handle light hydrocarbons, often near their boiling point with very low net positive suction head (NPSH) available. Our API 610 OH2 centrifugal pump is specifically engineered for reliable overhead reflux duty. This design fully complies with API 610 11th/12th edition (ISO 13709) .

Structure match check: API 610 OH2 is defined as a horizontal, single-stage, overhung pump with foot-mounted casing, back pull-out design, and centerline support for high temperature service. This matches exactly the requirements for overhead reflux: moderate flow, high head (depending on tower pressure), low NPSH, and high temperature (up to 400°C). The OH2 design allows easy maintenance without disturbing piping – essential for continuous refinery operation.

Why API 610 OH2 for overhead reflux duty?

  • Low NPSH design – Overhead condensers typically provide very low NPSHa (often less than 3 m). Our OH2 pump features an optional inducer or specially designed high-suction-specific-speed impeller to achieve NPSHr as low as 0.5 m, preventing cavitation and vapour lock.

  • High temperature capability – Centerline support accommodates thermal expansion up to 400°C (depending on column overhead temperature). Suitable for light naphtha, gasoline, kerosene, and even water reflux.

  • Light hydrocarbon handling – Optimized hydraulics for low viscosity, high vapour pressure fluids. Sealing systems designed for volatile service.

  • Back pull-out design – The rotating element, bearing housing, and seal can be removed while the casing remains in the pipework. Minimizes downtime for seal replacement or bearing inspection.

  • API 682 seal compatibility – Tandem or double mechanical seals with appropriate flush plans (Plan 11, 13, 23, 52, 53A, 54) to safely contain volatile hydrocarbons.

  • Wide hydraulic coverage – Flow 5 – 1500 m³/h, head up to 300 m, covering most distillation tower reflux duties (atmospheric, vacuum, and pressurized columns).

Key design features for overhead reflux service

  • Inducer option – For NPSHa below 2 m, an inducer is recommended to push NPSHr below 1 m.

  • Centerline support casing – Prevents misalignment due to thermal expansion. Foot-mounted only for lower temperature service (below 150°C).

  • Heavy duty bearing housing – Oil lubricated (pure oil mist optional). Labyrinth seals prevent contamination. For high temperature (above 200°C), cooling jackets on stuffing box and bearing housing are available.

  • Material selection – Carbon steel casing (WCB/WCC) for clean hydrocarbons. 12% chrome (CA6NM) or 316SS impeller/shaft for corrosion resistance. NACE MR0175 for sour reflux streams (H₂S present).

  • Impeller trim – Easily trimmed to match exact duty point without casing change.

  • Vibration and temperature monitoring – API 610 requires provisions for sensors; we include as standard.

Typical performance range

ParameterValue
Flow rate5 – 1500 m³/h
HeadUp to 300 m
Temperature-40°C to +400°C
Pressure ratingUp to 50 bar
NPSHr (with inducer)As low as 0.5 m
Speeds1450 / 2900 / 3600 rpm

Typical applications

  • Crude distillation unit (CDU) – Overhead naphtha / light gas oil reflux.

  • Vacuum distillation unit (VDU) – Overhead gas oil reflux.

  • FCC main fractionator – Overhead gasoline reflux.

  • Hydrocracker fractionator – Reflux of light hydrocarbons.

  • Reformer stabilizer – Overhead reflux.

  • Petrochemical distillation – Aromatics, olefins, solvents overhead reflux.

  • Amine / glycol regenerator – Overhead water reflux.

Why choose our API 610 OH2 overhead reflux pump?

  • Full API 610 compliance – Performance test, NPSH test, mechanical run test with vibration & temperature monitoring witnessed as required.

  • Low NPSH capability – Inducer option ensures reliable operation even with tight NPSHa from overhead condensers.

  • High temperature reliability – Centerline support and cooling options prevent thermal distortion.

  • Safe sealing – API 682 tandem/double seals with barrier/buffer fluid for zero fugitive emissions – critical for volatile overhead streams.

  • Short lead time – Standard sizes ex-stock; custom hydraulics with competitive delivery.

  • Global spare parts support – Impellers, shafts, casings, bearing housings, seals shipped worldwide.

  • Lower total cost – Competitive price + long MTBR + quick seal change without casing removal.

Quality assurance

  • ISO 9001:2015 certified.

  • API 610 mechanical run test (minimum 4 hours) with vibration and bearing temperature monitoring.

  • NPSH test verification (with inducer if specified).

  • Hydrostatic test of casing.

  • Material traceability EN 10204 3.1 / 3.2.

  • NDE – MT, PT, UT as required.

How to specify your overhead reflux pump

Please provide: flow (m³/h), head (m), operating temperature (°C), NPSHa available (m), specific gravity, vapour pressure, fluid composition (light naphtha, gasoline, water, etc.), H₂S content (for NACE), and whether variable speed is planned. We will recommend inducer (yes/no), impeller size, seal type and flush plan, material class, and driver details.

Contact us

For a quotation or technical discussion on overhead reflux pumps (API 610 OH2) :

info@hyrig.com


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit