PARKER CPOM3DD Pilot Check Valve (Hydraulic Lock)
Overview:
HYRIG can supply the PARKER CPOM3DD and related hydraulic components. This dual-line pilot-operated check valve provides leakage-free blocking in both A and B ports for NG10 circuits.
The CPOM3DD blocks flow in both A and B ports until pilot pressure is applied. The 0.8 bar cracking pressure is standard for the NG10 size.
Confirm the dual A&B (DD) configuration and 0.8 bar cracking pressure when replacing. Single-port versions (AA/BB) are available.
Used in PARKER Manapak sandwich valve stacks for NG10 circuits. For related components, view PARKER Manapak Check Valves.
Need to confirm whether dual (DD) or single (AA/BB) locking is required? Contact HYRIG with your circuit details.
Used for load-holding in both A and B lines in medium-flow hydraulic systems.
Disclaimer: PARKER is a registered trademark of Parker Hannifin Corporation. HYRIG is an independent supplier of hydraulic components and is not affiliated with Parker Hannifin Corporation.
Specifications:
Contact Us:
For PARKER CPOM3DD selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.