PARKER CPOM2DD Pilot Check Valve (Hydraulic Lock)
Overview:
HYRIG can supply the PARKER CPOM2DD and related hydraulic components. This dual-line pilot-operated check valve provides leakage-free blocking in both A and B ports for load-holding.
The CPOM2DD blocks flow in both A and B ports until pilot pressure is applied to release the check valves. The 1.0 bar cracking pressure is standard for the NG6 size.
Confirm the dual A&B (DD) configuration and 1.0 bar cracking pressure when replacing. Single-port versions (AA for A, BB for B) are available for circuits that do not require dual locking.
Used in PARKER Manapak sandwich valve stacks. For related components, view PARKER Manapak Check Valves.
Need to confirm whether dual (DD) or single (AA/BB) locking is required? Contact HYRIG with your circuit details.
Used for load-holding in both A and B lines, common in clamping, mold-locking, and lifting circuits.
Disclaimer: PARKER is a registered trademark of Parker Hannifin Corporation. HYRIG is an independent supplier of hydraulic components and is not affiliated with Parker Hannifin Corporation.
Specifications:
Contact Us:
For PARKER CPOM2DD selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.