PARKER CM2PPVHT Check Valve
Overview:
HYRIG can supply the PARKER CM2PPVHT and related hydraulic components. The CM2PPVHT is a direct-operated sandwich check valve that provides full-flow check function in the P-port.
The CM2PPVHT blocks flow in the P-port in one direction and allows free flow in the opposite direction. The 0.5 bar cracking pressure and FPM seals are specified by the VHT suffix.
Verify the controlled port (PP = P-port) and cracking pressure code (VHT = 0.5 bar) when replacing. Other port configurations (TT/AA/BB/DD) are available.
Used in PARKER Manapak sandwich valve stacks. For related components, view PARKER Manapak Check Valves.
Need to confirm the port or cracking pressure? Contact HYRIG with your circuit requirements.
Suitable for hydraulic systems requiring P-line isolation with minimal opening resistance.
Disclaimer: PARKER is a registered trademark of Parker Hannifin Corporation. HYRIG is an independent supplier of hydraulic components and is not affiliated with Parker Hannifin Corporation.
Specifications:
Contact Us:
For PARKER CM2PPVHT selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.