How to Read PARKER D41VW & D81VW Model Codes | Spool & Voltage

2026-10-25 15:58

How to Read PARKER D41VW & D81VW Model Codes

HYRIG can supply PARKER D41VW and D81VW pilot-operated directional valves. Understanding the model code is essential for selecting the correct spool type, spool position, and electrical/pilot option.

Model Code Structure (Example: D81VW030B1NJW)

PositionCodeMeaningOptions
1D41VW / D81VWSeries & SizeD41VW = NG16; D81VW = NG25
2001 / 002 / 020 / 026 / 030 etc.Spool typeDetermines flow paths in each position
3B / C / H / DSpool positionSolenoid configuration and spring/detent behaviour
41 / 2 / 3 / 4Pilot supply / drainInternal/External pilot and drain combinations
5N / -Seal materialN = NBR (standard); omit = NBR standard
6J / K / U / GVoltageJ = 24V DC; K = 12V DC; U = 98V DC; G = 205V DC
7W / A / Y etc.Electrical connectionW = connector EN 175301-803; A/Y = other connector types

Spool Position Codes (B, C, H, D)

  • C: Double solenoid, 3-position, spring centred
  • B: Single solenoid, 2-position, spring offset (P→A, B→T in offset position)
  • H: Single solenoid, 2-position, spring offset (P→B, A→T in offset position)
  • D: Double solenoid, 2-position, detent (no spring)

Spool Type Codes (001, 002, 020, 026, 030 etc.)

  • 001: 4-way, 3-position; all ports blocked
  • 002: 4-way, 3-position; all ports open (centre PTAB)
  • 020: 4-way, 2-position; closed crossover
  • 026: 4-way, 2-position; B and T blocked
  • 030: 4-way, 2-position; open crossover

Voltage Codes

  • J: 24V DC (most common)
  • K: 12V DC
  • U: 98V DC
  • G: 205V DC

Pilot Supply / Drain

D41VW and D81VW require a minimum pilot pressure (typically 5.1 bar, or 6.9 bar for spool 002/007/008/009/014). Pilot supply and drain can be configured as internal or external, specified by code positions in the full model number.

Selection Support

Need help decoding your existing nameplate or selecting a replacement? Contact HYRIG with your full model code or a photo of the nameplate, and our engineers will confirm the correct configuration. For a ready reference, view PARKER D81VW030B Directional Valve.

Related Valve Series

Browse the complete series pages for available spool and voltage combinations: PARKER D41VW Directional Valve Series and PARKER D81VW Directional Valve Series.

Disclaimer: PARKER is a registered trademark of Parker Hannifin Corporation. HYRIG is an independent supplier of hydraulic components and is not affiliated with Parker Hannifin Corporation.

Contact

For help with PARKER D41VW/D81VW model codes, contact HYRIG: info@hyrig.com

Name:
Message:
Verification code:
Submit
Comment