HYRIG can supply piggable swing check valves for pipeline maintenance. The full-bore design ensures that when the valve is open, the flow path is clear of obstructions, allowing pipeline inspection gauges (pigs) to pass through smoothly.
| Feature | Standard Valve | Piggable Valve |
|---|---|---|
| Bore | Full bore or reduced | Full bore, matched to pipe ID |
| Internal Obstruction | Disc may obstruct top of bore | Disc fully clears the bore |
| Pig Passage | Restricted or blocked | Unrestricted passage |
| Face-to-Face | ASME B16.10 | ASME B16.10 |
| Dimension | Standard |
|---|---|
| Face-to-Face (RF) | ASME B16.10 |
| Flanged Ends | ASME B16.5 / ASME B16.47 |
| Butt Weld Ends | ASME B16.25 |
A standard swing check valve relies on forward flow to push the disc open. However, the hinge mechanism and the disc thickness can protrude into the top of the flow path, creating a physical barrier for pipeline pigs.
A piggable swing check valve is designed with a recessed hinge area or a specially shaped disc that fully clears the internal bore when open. The internal diameter is machined to match the pipeline ID, ensuring a smooth, uninterrupted path for inspection tools.
When specifying a check valve for a piggable line:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation. Verify pig dimensions against the valve bore prior to operation.
Q: What makes a swing check valve piggable?
A piggable swing check valve has a full-bore design and a recessed hinge mechanism. When the disc is open, it clears the flow path entirely, leaving no obstruction for pipeline tools.
Q: Can any swing check valve be pigged?
No. Standard swing valves have hinge components that protrude into the bore. Only valves specifically designed with full-bore clearance should be pigged.
Q: Does a piggable valve have higher pressure drop?
No. Because the valve is full bore and the disc clears the path, the pressure drop is comparable to or lower than a standard swing valve.
Q: What is the typical lead time?
Standard lead time is 4 to 6 weeks depending on size, class, and end connection.
For piggable applications, provide the pipeline size, pig dimensions, pressure class, and flow direction. Our engineers will confirm the internal clearance and suitable valve design.
For piggable swing check valve selection, contact HYRIG: info@hyrig.com