HYRIG supplies both plug valves and ball valves. This guide explains the structural difference between the cavity-free plug valve and the cavity-contained ball valve, helping you select the correct design for slurry, abrasive, or clean fluid service.
| Feature | Plug Valve | Ball Valve |
|---|---|---|
| Internal Cavity | None (seat is flush with plug) | Yes (between ball and body) |
| Slurry / Abrasive Service | Excellent (solids cannot accumulate) | Poor (cavity traps solids) |
| Wiping Action | Yes (self-cleaning) | No |
| Sealing Type | Soft PTFE sleeve or metal seat | Soft PTFE or metal seat |
| Pressure Drop | Low | Very low |
| Dimension | Standard |
|---|---|
| Face-to-face | ASME B16.10 / API 6D |
| Flanged ends | ASME B16.5 |
| Butt weld ends | ASME B16.25 |
A ball valve uses a sphere with a through-hole. The sphere rotates within a cavity in the valve body. When the valve is closed, the cavity is exposed to the process fluid. In slurry or abrasive service, solids can settle in this cavity and prevent the ball from rotating, causing the valve to jam.
A plug valve uses a tapered plug. The seating surface is directly against the body (or PTFE sleeve). There is no cavity for solids to accumulate. As the plug rotates, it wipes the seating surface clean. This cavity-free design is why plug valves are preferred for mining slurries, pulp stock, and wastewater sludge.
When replacing a ball valve with a plug valve:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Q: Why does a ball valve jam in slurry service?
Solids settle in the cavity between the ball and the valve body. Over time, these solids compact and prevent the ball from rotating.
Q: Is a plug valve better for clean fluids?
Both are suitable. A ball valve often provides a tighter seal with lower torque in clean fluids, but a sleeve type plug valve is also highly effective.
Q: Which valve has lower pressure drop?
Both have low pressure drop when fully open. A full-bore ball valve and a full-port plug valve have similar flow characteristics.
Q: What is the typical lead time?
Standard lead time is 4 to 6 weeks depending on size, class, and material.
To select between a plug valve and a ball valve, provide the medium, solid content, operating temperature, and pressure class. Our engineers will confirm the correct design.
For help selecting between plug and ball valves, contact HYRIG: info@hyrig.com