Proportional Valve FAQ | Selection, Amplifiers & Troubleshooting

2026-11-04 11:39

Frequently Asked Questions

Q: What is the difference between a servo valve and a proportional valve?
A: Proportional valves are generally more robust to contamination and cost-effective, offering good control accuracy. Servo valves offer higher frequency response and precision but require much cleaner oil.

Q: Do I need an amplifier for a proportional valve?
A: Yes, all proportional valves require a matching electronic amplifier (VT series) to convert the command signal (e.g., 0-10V) into the correct current to drive the solenoids.

Q: How do I match the amplifier to the valve?
A: The amplifier must match the valve's solenoid type (current and resistance) and feedback type. For example, the 4WRE6 requires a closed-loop amplifier (VT-5005), while the 4WRA6 requires an open-loop amplifier (VT-3013).

Q: What is the recommended filtration for proportional valves?
A: A filtration of ≤20 μm is required, but ≤10 μm is highly recommended to ensure good control performance, prevent spool sticking, and extend valve life.

Q: Why does my proportional valve drift or have a dead band?
A: Drift or a dead band can be caused by contamination on the spool, incorrect zero-point adjustment on the amplifier, or air in the hydraulic system. Try bleeding the air and checking the amplifier's zero setting.

Q: What is the lead time for proportional valves?
A: Standard lead time is 20-30 days due to the complexity of the valves and electronic components. Urgent requests can be accommodated if specific configurations are in stock.

Q: Can I replace an old proportional valve with a new model?
A: Yes, but you must check three things: 1. Mounting pattern (ISO 4401); 2. Spool function; 3. Whether the new valve requires a different amplifier or sensor connection.

Selection Support

Not sure which valve or amplifier fits your system? Tell us your system pressure, flow rate, and required control accuracy, and our engineers will help you select the correct model.

Contact

For proportional valve selection and spare parts, contact HYRIG: info@hyrig.com

Related Pages

Name:
Message:
Verification code:
Submit
Comment