REXROTH Z2FS Throttle Check Valve Series | S, S2, AS, BS

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the REXROTH Z2FS series. These are twin throttle check valves in sandwich plate design, available in NG6, NG10, NG16, and NG22, with supply (S) or discharge (S2) throttling on side A or B.
Conatct For Details
DetailReview(0)Additional

REXROTH Z2FS Throttle Check Valve Series

Overview:

HYRIG can supply the REXROTH Z2FS series and related hydraulic components. These sandwich-mounted valves limit flow in one direction and allow free return flow through an integral check valve in the opposite direction.

Key Specifications & Model Comparison

Model CodeSizeThrottling TypeMax PressureMax Flow
Z2FS6S2NG6Discharge, standard315 bar80 L/min
Z2FS6AS2NG6Discharge, side A315 bar80 L/min
Z2FS6BS2NG6Discharge, side B315 bar80 L/min
Z2FS10S2NG10Discharge, standard315 bar160 L/min
Z2FS10AS2NG10Discharge, side A315 bar160 L/min
Z2FS10BS2NG10Discharge, side B315 bar160 L/min
Z2FS16S2NG16Discharge, standard350 bar250 L/min
Z2FS22S2NG22Discharge, standard350 bar360 L/min

Data source: REXROTH catalog RE 27518 and distributor listings.

For the NG10 A-side meter-out valve, view REXROTH Z2FS10AS2 Throttle Check Valve.

Dimensions (Text-Based)

ParameterNG6NG10NG16NG22
Mounting StandardISO 4401-03ISO 4401-05ISO 4401-07ISO 4401-08
Mounting Bolt Pattern4 × M54 × M64 × M104 × M10
Weight (approx.)0.9 kg3.1 kg4.7 kg8.0 kg

Cross-Reference & Replacement

When replacing a Z2FS valve, verify the throttling type (S vs. S2) and the side (A vs. B). A meter-in (S) valve installed where a meter-out (S2) was specified will alter the circuit's load-holding behavior and may cause instability.

Selection Support

Not sure which throttling variant your machine requires? Describe your actuator and load condition, and HYRIG will recommend the correct Z2FS configuration.

Applications

Used for main flow or pilot flow limitation in hydraulic systems, particularly for controlling actuator speed in machine tools and presses.

Disclaimer: REXROTH is a registered trademark of Bosch Rexroth AG. HYRIG is an independent supplier of hydraulic components and is not affiliated with Bosch Rexroth AG.

Specifications:

  • Valve Type: Twin throttle check valve (sandwich plate)
  • Sizes: NG6, NG10, NG16, NG22
  • Throttling Options: Supply (S) or discharge (S2), on side A or B
  • Maximum Operating Pressure: 315 bar (NG6/10), 350 bar (NG16/22)
  • Maximum Flow: 80 L/min (NG6), 160 L/min (NG10), 250 L/min (NG16), 360 L/min (NG22)

Contact Us:

For REXROTH Z2FS series selection, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit