REXROTH MG & MK Throttle Valve Series
Overview:
HYRIG can supply the REXROTH MG and MK series and related hydraulic components. These inline valves are directly installed in pipework and are pressure- and viscosity-dependent.
| Model Code | Type | Size | Throttling Direction | Reverse Flow |
|---|---|---|---|---|
| MG6G | Throttle | NG6 | Both directions | — |
| MG20G | Throttle | NG20 | Both directions | — |
| MG30G | Throttle | NG30 | Both directions | — |
| MK6G | Throttle check | NG6 | One direction | Free (0.5 bar) |
| MK20G | Throttle check | NG20 | One direction | Free (0.5 bar) |
| MK30G | Throttle check | NG30 | One direction | Free (0.5 bar) |
Data source: REXROTH catalog RD 27219 and distributor listings.
For the NG20 bidirectional throttle, view REXROTH MG20G Throttle Valve. For the NG25 throttle check valve, view REXROTH MK25G Throttle Check Valve.
| Parameter | Value |
|---|---|
| Connection Type | Threaded (G series) |
| Mounting Position | Any (inline) |
| Seal Material | NBR (standard), FKM (optional, `V` suffix) |
Choose MG when throttling is required in both flow directions. Choose MK when one direction must throttle and the reverse direction must flow freely (e.g., for fast return strokes). The `G` suffix denotes threaded connection.
Not sure whether you need bidirectional (MG) or one-way (MK) throttling? Describe your circuit's flow requirements, and HYRIG will confirm the correct series and size.
Used for speed control in hydraulic systems with inline piping, particularly where a compact, direct-mounted solution is preferred over a sandwich valve.
Disclaimer: REXROTH is a registered trademark of Bosch Rexroth AG. HYRIG is an independent supplier of hydraulic components and is not affiliated with Bosch Rexroth AG.
Specifications:
Contact Us:
For REXROTH MG/MK series selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.