Sand Pump 150-250 – 40‑180m Head & 200‑800 m³/h Flow | API 610 Centrifugal Pump for Abrasive Slurry Service

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The Sand Pump 150-250 (API 610 OH2/BB2/VS4) handles 200‑800 m³/h at 40‑180m head. High‑chrome alloys, Plan 32 seal, handles ≤35mm solids. Direct replacement for Sulzer, Flowserve, Goulds – no baseplate/piping mods. Better cost, shorter delivery. Contact: info@hyrig.com
Conatct For Details
DetailReview(0)Additional

Product Overview

The Sand Pump 150-250 is a family of heavy‑duty centrifugal pumps designed specifically for handling sand‑laden water, tailings, and abrasive slurries in dredging, mining, port maintenance, and power plant ash transport. Built to API 610 (ISO 13709) 11th/12th Edition standards, these pumps feature robust construction, abrasion‑resistant materials, and optimized hydraulics to ensure long service life in the most demanding solid‑liquid applications.

Typical operating ranges:

  • Flow rate: 80 – 1200 m³/h (optimal: 200 – 800 m³/h)

  • Head: 40 – 180 m (single‑stage; series connection up to 300+ m)

  • Working pressure: ≤ 5.0 MPa (Class 300)

  • Temperature: –20 to 120 °C (custom materials for higher temperature)

  • Solids handling: up to 35 mm particle size, ≤ 55% solids by weight

  • Speed: 1450 rpm / 2950 rpm


API 610 Configurations – Choose the Right Pump for Your Sand Service

1. OH2 – Overhung, Centerline‑Mounted (Preferred for General Sand Pumping)

  • Flow range: 6.3 – 4500 m³/h

  • Head range: 5 – 250 m

  • Pressure rating: up to 10 MPa (Class 600)

  • Temperature: –60 to 450 °C (standard sand service ≤120 °C)

  • Key features:

    • Centerline mounting for thermal stability

    • Back pull‑out design – maintenance without disturbing piping

    • Double volute casing (≥DN80) to balance radial forces and reduce wear

    • High‑chrome alloy (Cr27) or rubber‑lined wet ends

Best for: river dredging, sand mining, fly ash transport, and general sand slurry pumping.

2. BB2 – Between‑Bearings, Axial Split (High‑Pressure & High‑Capacity)

  • Flow range: 10 – 7000 m³/h

  • Head range: 30 – 800 m (two‑stage up to 440 m; three‑stage to 800 m)

  • Pressure rating: up to 15 MPa (Class 900)

  • Temperature: –80 to 425 °C

  • Key features:

    • Double‑ended bearing support for superior rotor stability

    • Heavy‑duty shaft per API 610 Appendix K

    • API 682 seal chamber with custom flush plans (Plan 32/35) to exclude sand

Best for: deep‑sea sand mining, long‑distance tailings transport, high‑pressure port dredging.

3. VS4 – Vertical Suspended (Submersible / Sump Pump)

  • Flow range: 5 – 600 m³/h

  • Head range: 10 – 150 m

  • Pressure rating: ≤ 2.5 MPa

  • Submersion depth: up to 8 m

  • Key features:

    • Pump sits below liquid level – no priming needed

    • Semi‑open impeller for clog‑free operation

    • Multi‑point bearing support for long shaft stability

Best for: settling pond fines, sump dewatering, small‑channel dredging, and confined spaces.


Key Design Features for Sand & Abrasive Service

  • Abrasion resistance: High‑chrome cast iron (Cr27), ceramic‑lined, or rubber‑lined wet ends; open/semi‑open impellers to reduce wear.

  • Clog‑free hydraulics: Flow path width ≥1.5 × max particle size; inlet strainers optional.

  • Seal protection: API 682 mechanical seals with flush plans (Plan 32 for clean external fluid injection, Plan 35 for quench) keep sand out of the seal chamber.

  • Heavy‑duty bearings: Oil‑ring or oil‑mist lubrication; shaft stiffness meets API 610 Appendix K for high radial loads.


Complete Brand Interchangeability

Hyrig’s API 610 sand pumps are direct drop‑in replacements for the following world‑leading brands – no baseplate or piping modifications required:

  • Sulzer – OHHL (OH2), BBS (BB2), SJD/SJV (VS4) series

  • Flowserve – HPXM (OH2), HDB (BB2), WUC/WDC (VS4) series

  • Goulds (Xylem) – 3700 (OH2), 7200CB (BB2), VIC/3900 (VS4) series

All replacements deliver identical performance, hydraulic coverage, nozzle orientation, and footprint.


Why Choose Hyrig for Your Sand Pump Needs?

Hyrig specializes in API 610 standard process centrifugal pumps (OH2, BB2, BB5, VS6). Our core strength is providing complete drop‑in replacements for Sulzer, Flowserve, and Goulds. Every pump is manufactured to exact OEM interface dimensions, ensuring seamless installation.

We offer:

  • Identical performance – verified by hydraulic testing

  • Same quality – ISO 9001, API 610, and customer‑specified abrasion‑resistant materials

  • Full compliance – with all applicable industry standards

  • Better cost‑effectiveness – up to 30% savings

  • Shorter delivery times – expedited schedules available

For inquiries, please contact us at: info@hyrig.com

Direct Drop-in Replacements for Sulzer, Flowserve & Goulds API 610 Pumps (OH2, BB2, BB5, VS6)

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit