SH Series API 610 BB2 High Flow Circulating Water Pump

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
SH series horizontal axially split single stage double suction pump designed to API 610 Type BB2 (single-stage radial split, between bearings). For large flow circulating water and utility water. Flow 100-20,000 m³/h (high flow option up to 18,000 m³/h), head 10-300 m, pressure up to 2.5 MPa, temperature -20°C to +105°C. Materials: cast iron, 304/316 SS, duplex.

Conatct For Details
DetailReview(0)Additional

The SH series is a horizontal single-stage end-suction double-suction centrifugal pump that meets the BB2 configuration (single-stage, bearing-fixed, radially split). The API 610 BB2 standard is a horizontal, radial split, single-stage or two-stage, bearing-fixed centrifugal pump specially designed for high-flow, medium-high-lift conveying scenarios. The SH series adopts a high-flow hydraulic model design, has a wide flow range, and is widely used in high-flow circulation and large-diameter water supply.

Key Parameters (Circulating Water)

ParameterSH Series Range
Flow rate100 - 11,600 m³/h (SH standard); up to 20,000 m³/h (high flow version)
Total headUp to 300 m
Working pressureUp to 2.5 MPa
Operating temperature-20°C to +105°C
EfficiencyUp to 90%

Design Features

Axially split casing (horizontal split): The pump cover and pump body are horizontally split along the axis. The pump casing adopts a horizontal split structure, and the upper half impeller and rotor parts can be removed without disassembling the inlet and outlet pipelines, greatly facilitating maintenance.

Double suction impeller: The double suction impeller adopts a symmetric structure, and water flows into the impeller from both sides. It achieves self-balancing of thrust, eliminates hydraulic axial force, and significantly reduces bearing load. The symmetrical double-suction structure significantly reduces the required net positive suction head and has a low NPSH characteristic.

Double volute design: The pump body adopts a double volute design (double volute) to effectively balance radial force, reduce shaft deflection, and extend mechanical seal and bearing service life. Double volute and symmetric impeller configurations allow the pump to adapt to different pressure conditions and improve stability.

Centerline support feet: Feet are located at the pump casing centerline to accommodate thermal expansion and prevent misalignment.

Rigid shaft design: Large diameter shaft design (large shaft diameter) increases strength, reduces deflection, and meets API 610 deflection standards, ensuring stable operation of mechanical seals.

Heavy-duty bearings: Bearing configurations can be selected as needed. Rolling bearings are used for grease lubrication, and sliding bearings or forced lubricated bearings are used for high power.

API 682 seal chamber: The seal chamber fully complies with API 682 standards and can be equipped with mechanical seals or packing seals. For clean water circulation, optional packing is economical. For high-temperature or critical applications, single mechanical seals with Plan 11 are standard, and tandem or double seals can be selected.

Materials (Circulating Water)

ComponentStandard GradeUpgraded Grade
CasingCast iron (HT250) / Carbon steel (WCB)304/316 SS / Duplex
ImpellerCast iron / Bronze / 12% Cr steel304/316 SS / Duplex
ShaftAISI 4140 / 2Cr1317-4PH / Duplex
Wear ringHardened 12% Cr steelStellite facing / SiC
Gasket / O-ringSpiral wound (SS/Graphite)PTFE / FFKM

Applications

  • Power plant large flow circulating cooling water – condensing steam in thermal and nuclear power plants where "large volume and stable pressure" characteristic matches condenser cooling demand

  • Large central air conditioning and HVAC chillers – primary and secondary chilled water circulation in building complexes, shopping malls, and data centers

  • Municipal water supply – water plants and distribution – primary pressurization and booster stations in municipal water systems

  • Agricultural irrigation – high efficiency, high flow irrigation – covering large areas of water demand

  • Industrial process cooling circulation – cooling loops in steel, chemical, and petrochemical plants

  • District cooling and district heating systems – large scale central cooling/heating circulation

Why Choose SH Series for High Flow Circulating Water?

  • Full API 610 BB2 type compliance – heavy duty process pump designed for 25+ year service life in demanding applications

  • High flow / high efficiency – up to 20,000 m³/h capacity at up to 90% efficiency, suitable for continuous operation for long-term energy savings

  • Double suction impeller – reduces NPSH requirement (reduces cavitation risk) and eliminates axial thrust loads for significantly longer bearing life

  • Axially split casing – enables full rotor access without disturbing piping, reducing maintenance downtime by more than half

  • Wide material selection – cast iron, bronze, 304SS, 316SS, duplex accommodate fresh water, brackish water, and corrosive circulating fluids

  • Vertical or horizontal installation – compact, space‑saving configurations

  • China manufacturer – cost‑effective, quick delivery, and local support available

For more information or a custom proposal for your high flow circulating water pump application, contact us at info@hyrig.com.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit