Shaffer 132540 Locking Shaft Seal | 13-5/8" 10M Type 75 SL

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the Shaffer Type 75 SL BOP seal range and its spare parts. The Shaffer 132540 is a locking shaft seal assembly designed for 13-5/8" 10M Type 75 SL BOPs, sealing the locking shaft against wellbore pressure.
Conatct For Details
DetailReview(0)Additional

HYRIG can supply the Shaffer Type 75 SL BOP seal range and its spare parts. The Shaffer 132540 is a locking shaft seal assembly designed for 13-5/8" 10M Type 75 SL BOPs, sealing the locking shaft against wellbore pressure.

Key Facts

  • Product Name: Shaffer Type 75 SL Locking Shaft Seal Assembly
  • Part Number: 132540
  • BOP Size: 13-5/8"
  • Pressure Rating: 10,000 psi (10M)
  • Material: NBR (Nitrile Rubber)

Key Specifications

ParameterDetail
Part Number132540
Component TypeLocking Shaft Seal Assembly
Equipment TypeShaffer Type 75 SL Ram BOP
BOP Size13-5/8"
Working Pressure10,000 psi
MaterialNBR (Nitrile Rubber)

Data source: Technical data table and official specifications.

Dimensions

ParameterDetail
Seal TypeLocking Shaft Seal
Assembly PositionAround the locking shaft
WeightNot specified; confirm with supplier

Structure / Working Principle

The locking shaft seal assembly is installed around the locking shaft (used to lock the rams in place). It prevents wellbore fluids from leaking out of the BOP body along the shaft.

Cross-Reference & Replacement

When replacing the 132540 seal assembly, verify the part number against your equipment manual.

Related Components:

Selection Support

Not sure if this seal fits your BOP? Provide your BOP model and serial number. HYRIG will confirm the correct Shaffer part.

Applications

Suitable for Shaffer Type 75 SL ram BOPs (13-5/8" 10M) during locking shaft maintenance or major overhauls.

Spare Parts

HYRIG provides replacement locking shaft seal assemblies and related soft goods for Shaffer Type 75 SL BOPs.

Frequently Asked Questions

What is the purpose of the locking shaft seal?
It seals the shaft used to lock the rams, preventing wellbore pressure from escaping.

When should the locking shaft seal be replaced?
It should be replaced during major overhauls, or whenever a leak is detected at the shaft.

*Disclaimer: This equipment is designed for high-pressure and hazardous well control applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.*

Contact

HYRIG is a China-based manufacturer and global supplier of well control equipment and elastomer spare parts. We can supply the Shaffer 132540 locking shaft seal assembly. For selection support, contact HYRIG: info@hyrig.com

Page last updated: 2026-10-28

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit