Shaffer 50000 Sealant | 13-5/8" 10M Type 75 SL Secondary Seal

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the Shaffer Type 75 SL BOP seal range and its spare parts. The Shaffer 50000 is a sealant designed for 13-5/8" 10M Type 75 SL BOP secondary seals, ensuring a reliable barrier against wellbore pressure.
Conatct For Details
DetailReview(0)Additional

HYRIG can supply the Shaffer Type 75 SL BOP seal range and its spare parts. The Shaffer 50000 is a sealant designed for 13-5/8" 10M Type 75 SL BOP secondary seals, ensuring a reliable barrier against wellbore pressure.

Key Facts

  • Product Name: Shaffer Type 75 SL Sealant
  • Part Number: 50000
  • BOP Size: 13-5/8"
  • Pressure Rating: 10,000 psi (10M)
  • Application: Secondary Seal

Key Specifications

ParameterDetail
Part Number50000
Component TypeSealant
Equipment TypeShaffer Type 75 SL Ram BOP
BOP Size13-5/8"
Working Pressure10,000 psi

Data source: Technical data table and official specifications.

Dimensions

ParameterDetail
Seal TypeSealant (Secondary Seal)
Assembly PositionSecondary seal injection port
WeightNot specified; confirm with supplier

Structure / Working Principle

The 50000 sealant is injected into the secondary seal system of the BOP. It acts as a backup barrier if the primary elastomer seals fail, helping to maintain well control under high pressure.

Cross-Reference & Replacement

When using the 50000 sealant, verify the part number against your equipment manual.

Related Components:

Selection Support

Not sure if this sealant is right for your BOP? Provide your BOP model and serial number. HYRIG will confirm the correct Shaffer part.

Applications

Suitable for Shaffer Type 75 SL ram BOPs (13-5/8" 10M) during maintenance or emergency secondary sealing operations.

Spare Parts

HYRIG provides replacement sealants and seals for Shaffer Type 75 SL BOPs.

Frequently Asked Questions

What is the secondary seal system?
It is a backup sealing mechanism used if the primary seals fail or leak.

How is the sealant used?
It is typically injected into a designated port on the BOP to seal off leaks.

*Disclaimer: This equipment is designed for high-pressure and hazardous well control applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.*

Contact

HYRIG is a China-based manufacturer and global supplier of well control equipment and elastomer spare parts. We can supply the Shaffer 50000 sealant. For selection support, contact HYRIG: info@hyrig.com

Page last updated: 2026-10-28

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit