Selecting the correct packing element for a Shaffer Annular BOP depends on the well environment and operating conditions. This guide outlines the criteria for choosing between Natural and Nitrile compounds, distinguishes the Shaffer design from Hydril models, and provides critical installation guidelines.
| Condition | Action |
|---|---|
| You are operating in standard temperatures (up to 180°F / 82°C) without H₂S | Select the Natural Rubber packing element for optimal elasticity and sealing on irregular shapes. |
| The well contains H₂S, CO₂, or requires higher abrasion resistance | Select the Nitrile (NBR) packing element with NACE MR0175 compliance. |
| Your BOP nameplate indicates a Hydril model (GK, GL, GX) | Do not order Shaffer elements. The internal profiles and adapter ring geometries are entirely different. Contact HYRIG for Hydril matching. |
| The packing element is leaking after closing on pipe | Verify the operating pressure is correct, inspect the element for tears, and check if the Adapter Ring (Item 4) or Wear Bands (Item 15) are excessively worn. |
Common field error: Installing a Shaffer packing element without applying a generous coating of silicone or BOP grease to the bore, the element, and the adapter ring. Dry installation causes the elastomer to bind, leading to pinching, tearing, and premature failure on the first closure.
Email info@hyrig.com with:
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.