| Compatible Models | Derrick 6066-51 (10"), 10523-12 (4"), and other sizes upon request |
| Cone Sizes | 10-inch Desander, 4-inch Desilter (8"–20" available) |
| Flow Capacity | 500 GPM per cone (10"), 80 GPM per cone (4") |
| Separation Range | 40–100 μm (10"), 15–45 μm (4") |
| Body Material | Polyurethane standard; ceramic lower-section liner optional |
| Manifold Interface | Victaulic couplings: 5" (10"), 2" (4") |
| Replacement Compatibility | Drop-in replacement for standard FLC 503/504 desander/desilter manifolds |
| Parameter | 10" Desander Cone | 4" Desilter Cone | Other Sizes (8"–20") |
|---|---|---|---|
| Replacement Part No. | Derrick 6066-51 | Derrick 10523-12 | Available upon request |
| Cone Diameter | 10 in (254 mm) | 4 in (102 mm) | 8", 12", 14", 20" |
| Flow Capacity | 500 GPM at 75 ft head | 80 GPM | Varies by size |
| Separation Range | 40–100 μm | 15–45 μm | Varies by size |
| Body Material | Polyurethane / Ceramic optional | Polyurethane / Ceramic optional | Polyurethane / Ceramic |
| Apex / Tip Style | 1.250 in standard apex (6066-57) | Thread-on tip (10523-01) | Standard or variable |
| Coupling Type | 5" Victaulic #75 | 2" Victaulic snap coupling | Matches manifold |
| Operating Pressure | 0.06–0.3 MPa | Verify against manifold pressure | Verify against manifold pressure |
Data source: Technical data table.
| Model | Overall Height | Inlet/Outlet Interface | Approx. Weight |
|---|---|---|---|
| 10" Desander | Matches 6066-51 outline | 5" Victaulic groove | 18–22 kg |
| 4" Desilter | Matches 10523-12 outline | 2" Victaulic snap coupling | 3–5 kg |
Hydrocyclone cones separate solids from drilling fluid using centrifugal force. Mud enters tangentially and spins inside the cone; heavier sand and silt particles are pushed to the wall and exit through the apex (underflow), while cleaner fluid rises through the vortex finder (overflow). The 10" desander handles the primary sand removal at higher flow rates, while the 4" desilter polishes the mud by removing fine silt.
Both sizes feature field-replaceable wear components: the 10" cone uses a standard apex and holder (6066-57/58), and the 4" cone uses a thread-on tip (10523-01). This allows you to replace only the worn section without discarding the entire cone body, keeping maintenance costs low during shutdowns.
Upgrading or replacing worn cones across your mud cleaner? Here is what to check:
Not interchangeable with: Cones designed for non-Victaulic flanged manifolds or non-standard manifold layouts. If your manifold has a custom bolt pattern, contact HYRIG with the manifold drawing before ordering.
Not sure whether your manifold accepts 10" desander or 4" desilter cones, or whether a thread-on tip vs. drop-in apex is right for your setup?
Send us your manifold drawing or current cone nameplate, and we will confirm the exact matching replacement.
HYRIG provides a full range of replacement parts for compatible hydrocyclone cones. Whether you need complete assemblies or specific wear components, we supply the critical parts that keep your manifold running:
To browse individual wear parts and inspection guidelines, see our Derrick-compatible hydrocyclone wear parts index.
Q1: Are these original Derrick hydrocyclone cones?
A: No. HYRIG supplies independent, compatible replacement cones and is not affiliated with or endorsed by Derrick.
Q2: How do I choose between the 10" desander and 4" desilter cones?
A: Use 10" cones to remove sand at 500 GPM; use 4" cones to remove fine silt at 80 GPM.
Q3: Do you supply sizes other than 10-inch and 4-inch?
A: Yes. We supply 8", 12", 14", and 20" compatible cones upon request. Send your drawing for a quote.
Q4: What is the lead time for bulk cone replacement orders?
A: Standard polyurethane cones ship in 2–3 weeks. Plan orders ahead of year-end shutdowns or rig moves.
Q5: What are the most common wear parts on these cones?
A: The apex (10") and thread-on tip (4") wear fastest. Inspect them every 500–1,000 operating hours.
For Derrick-compatible hydrocyclone cone selection and spare parts, contact HYRIG: info@hyrig.com
What to include for fastest quote:
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.