HYRIG's Angular Contact Bearing Set (Part No. 2000-200400) is a precision-matched replacement assembly exclusively engineered for Sulzer BBS 200-400 double suction centrifugal pumps, fully complying with API 610 (12th Edition) and ISO 3408 standards. As the core rotating support component of the pump, this pre-paired bearing set is designed to withstand combined axial and radial loads, ensure high-speed rotational stability, and maintain precise shaft alignment—directly replicating Sulzer's original bearing specifications (size, clearance, load rating) at a cost-effective price point.
Crafted for demanding industrial environments (chemical processing, petroleum refining, power generation, and water treatment), the bearing set features high-quality rolling elements, optimized cage design, and precision grinding to minimize friction, reduce vibration, and extend service life. Each set is factory-paired for preload matching and concentricity, ensuring seamless integration with Sulzer BBS 200-400 shafts, 1211-200400 bearing-side shaft sleeves, and bearing housings, guaranteeing reliable pump operation under continuous load conditions.
| Item | Details |
|---|---|
| Part Number | 2000-200400 |
| Compatible Pump Model | Sulzer BBS 200-400 (API 610 Centrifugal Pump) |
| Compatible Component | 1211-200400 Shaft Sleeve (Bearing Side) (HYRIG/Sulzer Original) |
| Design Standard | API 610 (12th Edition), ISO 3408, DIN 628 |
| Bearing Type | Angular Contact Ball Bearing (paired set, back-to-back or face-to-face configuration per Sulzer design) |
| Set Configuration | 2 bearings per set (factory-matched for preload and clearance) |
| Load Capacity | Axial load: ≥25 kN (dynamic), ≥15 kN (static); Radial load: ≥45 kN (dynamic), ≥28 kN (static) |
| Operating Speed | Max. rotational speed: 3600 rpm (continuous operation, oil lubrication) |
| Clearance Class | C3 (standard) / C4 (high-temperature/high-load optional) |
| Precision Class | P6 (ISO 492) – optimized for pump rotational stability |
| Shaft Fit | H7 (compatible with 1211-200400 shaft sleeve outer diameter) |
| Housing Fit | J7 (compatible with Sulzer BBS 200-400 bearing housing) |
Select the optimal bearing material and cage type based on operating temperature, load intensity, and lubrication conditions—all options meet industrial pump requirements and API 610 compliance:
| Material (Ring/Rolling Elements) | Cage Material | Operating Temperature Range | Key Properties | Recommended Applications |
|---|---|---|---|---|
| High Carbon Chromium Bearing Steel (GCr15) | Steel (Stamped) | -20°C to 180°C (-4°F to 356°F) | High hardness (HRC 60-64), excellent wear resistance, cost-effective | General industrial applications, mineral oil lubrication, standard load/speed conditions |
| High Carbon Chromium Bearing Steel (GCr15) | Brass (Machined) | -20°C to 200°C (-4°F to 392°F) | Better load distribution, higher speed capability, corrosion resistance | High-speed operation, heavy-duty load, extended service intervals |
| Heat-Resistant Bearing Steel (50CrNiMo) | Steel/Brass | -30°C to 250°C (-22°F to 482°F) | Enhanced high-temperature stability, reduced creep deformation | High-temperature fluids, steam applications, thermal cycling conditions |
| Hybrid Ceramic (Steel Ring + Si3N4 Ceramic Balls) | PEEK/Brass | -40°C to 300°C (-40°F to 572°F) | Low friction, high wear resistance, electrical insulation | Corrosive environments, high-speed/high-load, lubrication-limited conditions |
| Stainless Steel (440C) | PEEK | -50°C to 250°C (-58°F to 482°F) | Superior corrosion resistance, good temperature stability | Seawater, chemical processing, corrosive lubricants |
*Material certification available upon request (including mill test reports, EN 10204 3.1/B; fatigue life test reports per ISO 281).*
Bearing operating temperature exceeds 80°C (176°F) (continuous operation)
Abnormal vibration (vibration velocity >2.8mm/s at bearing housing)
Unusual noise (grinding, squealing, or rumbling during operation)
Lubricant contamination (metal particles, moisture, or discoloration)
Bearing play exceeds 0.05mm (measured with dial indicator)
Shaft runout increase (≥0.05mm at bearing location)
Proactive replacement: Every 2-3 years (or 8,000-10,000 operating hours) for critical applications
Verify part number, configuration, and clearance class (C3/C4) matches Sulzer BBS 200-400 requirements.
Check for transportation damage (dents, scratches) and ensure bearings rotate smoothly without binding.
Confirm compatibility with 1211-200400 bearing-side shaft sleeve (measure sleeve outer diameter and bearing inner diameter fit).
Inspect bearing housing for wear, corrosion, or deformation (clean and repair if needed).
Thoroughly clean the bearing-side shaft sleeve, bearing housing, and bearing set—remove rust, debris, or old lubricant.
For press-fit installation: Use a bearing press or sleeve tool to install bearings (apply force only to the ring with interference fit; avoid pressing on rolling elements).
Maintain factory-paired orientation (back-to-back/face-to-face) – do not separate or reorder the bearing set.
Apply specified lubricant (mineral oil, synthetic oil, or grease) to the bearing interior and housing cavity (fill 1/3-1/2 of housing volume).
Torque the bearing locknut to Sulzer's recommended specification (typically 100-150 N·m for BBS 200-400) to set preload.
Install the oil seal and bearing cover, ensuring proper sealing to prevent lubricant leakage and contamination.
Perform static rotation test to confirm smooth operation without binding.
Measure shaft runout at the bearing location (≤0.03mm) using a dial indicator.
Monitor temperature and vibration during initial 24-hour operation (temperature rise should not exceed 30°C above ambient).
Check lubricant level and condition after first week of operation; top up or replace if needed.
Factory-Matched Precision: Pre-paired bearings ensure consistent preload, concentricity, and load distribution—eliminating assembly errors.
Load & Speed Optimized: Engineered to withstand combined axial/radial loads and high rotational speeds, meeting Sulzer's original performance requirements.
Seamless Compatibility: Perfectly fits 1211-200400 bearing-side shaft sleeve and Sulzer BBS 200-400 bearing housing—no modifications required.
Durable & Reliable: High-quality materials and precision manufacturing ensure long service life and reduced downtime.
Quality Assurance: 12-month warranty against material defects and manufacturing errors; technical support for preload adjustment and lubrication selection.
For pricing, material/cage options, lead time, or custom clearance class requests (e.g., C4 for high-temperature applications), contact HYRIG's technical sales team:
Email: info@hyrig.com
Please provide your pump's serial number, operating conditions (temperature, speed, load characteristics), and lubricant type for personalized recommendations and a detailed quote.
Note: HYRIG's 2000-200400 angular contact bearing set is a drop-in alternative to Sulzer original parts, designed to meet or exceed API 610 and ISO 3408 performance and reliability standards. All sets are packaged in moisture-proof, shock-resistant containers to protect against damage during transit.