HYRIG's Casing Wear Ring (Part No. 1300-200400) is a precision-engineered replacement component exclusively designed for Sulzer BBS 200-400 double suction centrifugal pumps, fully adhering to API 610 (12th Edition) standards. As a critical stationary wear part, it mates seamlessly with the impeller wear ring (HYRIG Part No. 1120-200400 / Sulzer Original) to form a tight hydraulic seal, protect the pump casing from abrasion and erosion, and maintain optimal internal clearance—directly replicating Sulzer's original design dimensions, fit, and performance at a cost-effective price point.
Crafted for harsh industrial environments (chemical processing, petroleum refining, power generation, and water treatment), the casing wear ring features a robust, precision-machined structure that withstands high-velocity fluid flow, particulate impact, and corrosive media. Each unit undergoes strict dimensional inspection and surface finishing to ensure seamless integration with Sulzer BBS 200-400 pump casings and impellers, reducing internal leakage, preserving pump efficiency, and extending overall maintenance intervals.
| Item | Details |
|---|---|
| Part Number | 1300-200400 |
| Compatible Pump Model | Sulzer BBS 200-400 (API 610 Centrifugal Pump) |
| Mating Component | 1120-200400 Impeller Wear Ring (HYRIG/Sulzer Original) |
| Design Standard | API 610 (12th Edition) |
| Function | Abrasion protection for pump casing, hydraulic clearance control, internal leakage reduction |
| Installation Position | Mounted inside the pump casing (stationary component, mates with rotating impeller wear ring) |
| Dimensional Tolerance | Complies with ISO 2768-m and DIN 40683 standards |
| Fit Type | Precision press fit (matches pump casing inner diameter) |
| Recommended Clearance | 0.2-0.5mm (with impeller wear ring, per API 610 requirements) |
| Material Compatibility | Matches impeller wear ring material (optimized for friction reduction) |
Select the optimal material based on media abrasiveness, corrosion intensity, and operating temperature—all materials are engineered to work in perfect tandem with the mating impeller wear ring, ensuring minimal friction and maximum durability:
| Material | Operating Temperature Range | Key Properties | Recommended Applications |
|---|---|---|---|
| High Chromium Cast Iron (Cr15) | -20°C to 150°C (-4°F to 302°F) | Excellent wear resistance (hardness HRC 58-62), cost-effective, compatible with Cr15 impeller wear ring | Freshwater, low-solids fluids, mild abrasion conditions |
| Stainless Steel 316L | -50°C to 350°C (-58°F to 662°F) | Superior corrosion resistance, good wear performance, compatible with 316L/SiC impeller wear ring | Seawater, chemical solvents, corrosive media with low abrasion |
| SiC Ceramic (Silicon Carbide) | -40°C to 400°C (-40°F to 752°F) | Extreme wear/corrosion resistance, high hardness (HV 2800), low friction coefficient | High-abrasion slurries, aggressive chemicals, high-velocity fluids (paired with SiC impeller wear ring) |
| Cemented Carbide (YG8) | -30°C to 300°C (-22°F to 572°F) | Ultra-high wear resistance (hardness HRA 89-91), impact resistance, compatible with YG8 impeller wear ring | Mining slurries, sand-laden fluids, severe abrasion environments |
| Duplex Steel 2205 | -40°C to 315°C (-40°F to 600°F) | Balanced corrosion/wear resistance, high strength (yield ≥450MPa), compatible with 2205 impeller wear ring | Oil & gas production, desalination, corrosive-abrasive mixed media |
*Material certification available upon request (including mill test reports, EN 10204 3.1/B; ceramic/carbide material test certificates).*
Clearance between casing wear ring and impeller wear ring exceeds 1.5x the original design value (typically >0.75mm)
Visible wear, grooves, or pitting on the ring's inner mating surface (wear depth >0.3mm)
Pump efficiency drops by >8% (due to increased internal recirculation)
Casing disassembly for major maintenance (recommended to inspect and replace if wear is detected)
Synchronous replacement with impeller wear ring (optimal for maintaining consistent clearance)
Verify part number, material, and dimensional fit with Sulzer BBS 200-400 pump casing (reference pump maintenance manual).
Check for transportation damage (chips, cracks) and ensure inner mating surface is smooth (no burrs, scratches, or corrosion).
Confirm compatibility with the paired impeller wear ring (1120-200400) and measure both rings to ensure target clearance (0.2-0.5mm).
Thoroughly clean the pump casing's wear ring mounting bore—remove rust, debris, or old adhesive/residue.
For press fit designs: Use a hydraulic press or uniform force tool to install the ring (avoid hammering, which causes deformation). Ensure the ring is seated flush with the casing's internal shoulder.
For interference fit (tight tolerance): Cool the casing wear ring to -20°C to -40°C (-4°F to -40°F) using dry ice (avoid liquid nitrogen to prevent material brittleness) to shrink the outer diameter, then insert into the casing bore.
Allow the ring to return to ambient temperature (if cooled) and verify no movement or misalignment.
Deburr the inner edge of the ring (if needed) to prevent damage to the impeller wear ring during impeller installation.
Perform a static rotation test with the impeller installed to confirm no contact between the two wear rings.
Measure radial clearance at 4 equidistant points (top, bottom, left, right) to ensure uniform spacing (variation ≤0.1mm).
Conduct a pressure test (per API 610 standards) to verify no internal leakage between the casing and wear ring.
Perfect Mating Fit: CNC-machined to match Sulzer BBS 200-400's original casing dimensions and pair seamlessly with 1120-200400 impeller wear ring—no modifications required.
Dual Protection Design: Protects pump casing from abrasion/erosion while maintaining critical hydraulic clearance, preserving pump efficiency.
Material Synergy: Optimized material options that work in tandem with impeller wear ring materials to reduce friction and extend service life.
Direct Replacement: Meets or exceeds Sulzer original specifications for dimensional accuracy, wear resistance, and API 610 compliance.
Quality Assurance: 12-month warranty against material defects and manufacturing errors; technical support for clearance measurement and installation guidance.
For pricing, material availability, lead time, or custom material requests (e.g., extreme wear/corrosion resistance), contact HYRIG's technical sales team:
Email: info@hyrig.com
Please provide your pump's serial number, operating conditions (media, temperature, pressure, solids content), and paired impeller wear ring model for personalized recommendations and a detailed quote.
Note: HYRIG's 1300-200400 casing wear ring is a drop-in alternative to Sulzer original parts, designed to meet or exceed API 610 performance and reliability standards. All units are packaged in shock-resistant materials to protect fragile surfaces (especially ceramic/carbide rings) during transit.