Impeller Wear Ring 1120-200400 | Compatible with Sulzer BBS 200-400 API 610 Centrifugal Pump

2026-03-15 17:33

Impeller Wear Ring 1120-200400 | Compatible with Sulzer BBS 200-400 API 610 Centrifugal Pump

Product Overview

HYRIG's Impeller Wear Ring (Part No. 1120-200400) is a precision-machined replacement component designed exclusively for Sulzer BBS 200-400 double suction centrifugal pumps, fully complying with API 610 (12th Edition) standards. As a critical wear-resistant part, this ring is engineered to protect the impeller and pump casing from abrasion, maintain optimal hydraulic clearance, and prevent internal fluid recirculation—directly matching Sulzer's original design dimensions, fit, and performance at a cost-effective price point.

Crafted for demanding industrial applications (chemical, petroleum, power, and water treatment), the wear ring features a robust structure that withstands high-velocity fluid flow, particulate erosion, and corrosive media. Each unit undergoes strict dimensional inspection and surface treatment to ensure seamless integration with Sulzer BBS 200-400 impellers and casings, extending pump efficiency and reducing maintenance frequency.


Key Specifications

ItemDetails
Part Number1120-200400
Compatible Pump ModelSulzer BBS 200-400 (API 610 Centrifugal Pump)
Compatible Component1100-200400 Double Suction Impeller (HYRIG/Sulzer Original)
Design StandardAPI 610 (12th Edition)
FunctionAbrasion protection, hydraulic clearance maintenance, internal leakage prevention
Installation PositionMounted on the impeller hub (mates with casing wear ring)
Dimensional ToleranceComplies with ISO 2768-m and DIN 40683 standards
Fit TypePrecision slip fit (matches impeller hub outer diameter)
Recommended Clearance0.2-0.5mm (with casing wear ring, per API 610 requirements)

Material Options & Application Suitability

Select the ideal material based on media abrasiveness, corrosion intensity, and operating temperature—all materials are optimized for wear resistance and compatibility with Sulzer BBS 200-400's operating conditions:

MaterialOperating Temperature RangeKey PropertiesRecommended Applications
High Chromium Cast Iron (Cr15)-20°C to 150°C (-4°F to 302°F)Excellent wear resistance (hardness HRC 58-62), cost-effectiveFreshwater, low-solids fluids, mild abrasion conditions
Stainless Steel 316L-50°C to 350°C (-58°F to 662°F)Superior corrosion resistance, good wear performanceSeawater, chemical solvents, corrosive media with low abrasion
SiC Ceramic (Silicon Carbide)-40°C to 400°C (-40°F to 752°F)Extreme wear/corrosion resistance, high hardness (HV 2800)High-abrasion slurries, aggressive chemicals, high-velocity fluids
Cemented Carbide (YG8)-30°C to 300°C (-22°F to 572°F)Ultra-high wear resistance (hardness HRA 89-91), impact resistanceMining slurries, sand-laden fluids, severe abrasion environments
Duplex Steel 2205-40°C to 315°C (-40°F to 600°F)Balanced corrosion/wear resistance, high strength (yield ≥450MPa)Oil & gas production, desalination, corrosive-abrasive mixed media

*Material certification available upon request (including mill test reports, EN 10204 3.1/B; ceramic/carbide material test certificates).*


Replacement Guidelines & Installation Best Practices

When to Replace

  • Clearance between impeller wear ring and casing wear ring exceeds 1.5x the original design value (typically >0.75mm)

  • Visible wear, grooves, or pitting on the ring's mating surface (wear depth >0.3mm)

  • Pump efficiency drops by >8% (due to increased internal leakage)

  • Impeller vibration increases (related to uneven wear-induced imbalance)

  • During impeller replacement (recommended to replace wear ring synchronously for optimal performance)

Installation & Maintenance Precautions

Pre-Installation Inspection

  1. Verify part number, material, and dimensional fit with Sulzer BBS 200-400 impeller (reference pump maintenance manual).

  2. Check for transportation damage (chips, cracks) and ensure mating surfaces are smooth (no burrs or scratches).

  3. Measure the inner diameter of the casing wear ring and outer diameter of the impeller wear ring to confirm clearance (0.2-0.5mm).

Installation Process

  1. Thoroughly clean the impeller hub mounting surface—remove rust, debris, or old adhesive/residue.

  2. For interference fit designs: Heat the wear ring to 80-100°C (176-212°F) using an oven or heat gun (avoid open flame) to expand the inner diameter, then slide onto the impeller hub until fully seated.

  3. For slip fit designs: Apply a thin layer of high-temperature thread lock/adhesive (compatible with material) to the hub surface before installing the ring to prevent rotation.

  4. Allow the ring to cool to ambient temperature (if heated) before proceeding with impeller installation.

  5. Ensure the wear ring is aligned concentrically with the impeller to avoid uneven wear.

Post-Installation Validation

  1. Perform a static rotation test to confirm no contact between the impeller wear ring and casing wear ring.

  2. Measure the radial clearance at 4 equidistant points to ensure uniform spacing (variation ≤0.1mm).

  3. Run the pump at idle speed for 10-15 minutes, then inspect for abnormal noise or vibration.


Why Choose HYRIG's 1120-200400 Impeller Wear Ring?

  • Precision Fit: CNC-machined to match Sulzer BBS 200-400's original dimensions—no modifications required for installation.

  • Wear-Resistant Design: Optimized material selection and surface treatment to withstand abrasive media and extend service life.

  • Efficiency Preservation: Maintains critical hydraulic clearance, minimizing internal leakage and preserving pump efficiency.

  • Direct Compatibility: Seamlessly pairs with HYRIG's 1100-200400 double suction impeller and Sulzer original components.

  • Quality Assurance: 12-month warranty against material defects and manufacturing errors; technical support for clearance adjustment and installation.


Order & Inquire

For pricing, material availability, lead time, or custom material requests (e.g., extreme wear/corrosion resistance), contact HYRIG's technical sales team:

Email: info@hyrig.com

Please provide your pump's serial number, operating conditions (media, temperature, pressure, solids content), and existing clearance measurements for personalized recommendations and a detailed quote.


Note: HYRIG's 1120-200400 impeller wear ring is a drop-in alternative to Sulzer original parts, designed to meet or exceed API 610 performance and reliability standards. All units are packaged in shock-resistant materials to protect fragile surfaces (especially ceramic/carbide rings) during transit.


Name:
Message:
Verification code:
Submit
Comment