Shaft Sleeve (Seal Side) 1210-200400 | Compatible with Sulzer BBS 200-400 API 610 Centrifugal Pump

2026-03-15 17:42

Shaft Sleeve (Seal Side) 1210-200400 | Compatible with Sulzer BBS 200-400 API 610 Centrifugal Pump

Product Overview

HYRIG's Shaft Sleeve (Seal Side) (Part No. 1210-200400) is a precision-manufactured replacement component exclusively engineered for Sulzer BBS 200-400 double suction centrifugal pumps, fully complying with API 610 (12th Edition) standards. As a critical protective part for the pump shaft's seal assembly area, this sleeve acts as a wear-resistant barrier between the shaft and mechanical seal (e.g., HYRIG Cartridge Mechanical Seal), preventing shaft damage from media corrosion, seal friction, and particulate abrasion—directly replicating Sulzer's original design dimensions, fit, and performance at a cost-effective price point.

Crafted for demanding industrial environments (chemical processing, petroleum refining, power generation, and water treatment), the seal-side shaft sleeve features a smooth, precision-finished surface that ensures optimal seal mating and leak-free operation. Each unit undergoes strict dimensional inspection, surface treatment, and concentricity testing to ensure seamless integration with Sulzer BBS 200-400 shafts, mechanical seals, and bearing assemblies, extending shaft service life and reducing maintenance downtime.


Key Specifications

ItemDetails
Part Number1210-200400
Compatible Pump ModelSulzer BBS 200-400 (API 610 Centrifugal Pump)
Installation PositionSeal side of the pump shaft (mating with cartridge mechanical seal)
Design StandardAPI 610 (12th Edition)
FunctionShaft protection against corrosion/friction, mechanical seal mating surface, abrasion resistance
Dimensional ToleranceComplies with ISO 2768-m and DIN 40683 standards
Fit TypePrecision sliding fit with pump shaft (interference fit optional for high-speed applications)
Surface FinishRa ≤ 0.8 μm (optimized for mechanical seal compatibility)
Concentricity≤ 0.02 mm (to ensure seal runout compliance)
LengthMatches Sulzer original design (optimized for seal assembly spacing)
Keyway CompatibilityMatches Sulzer BBS 200-400 shaft keyway dimensions

Material Options & Application Suitability

Select the optimal material based on media corrosion, temperature, and abrasion conditions—all materials are engineered to provide superior wear resistance and seal compatibility:

MaterialOperating Temperature RangeKey PropertiesRecommended Applications
Carbon Steel (45#)-20°C to 150°C (-4°F to 302°F)Cost-effective, good machinability, suitable for general serviceClean water, non-corrosive fluids, low-abrasion general industrial applications
Stainless Steel 304-50°C to 300°C (-58°F to 572°F)Good corrosion resistance, moderate wear performanceMild acids, alkalis, freshwater, low-chloride media
Stainless Steel 316L-50°C to 350°C (-58°F to 662°F)Superior corrosion resistance (chloride, sulfuric acid), high ductilitySeawater, chemical solvents, pharmaceuticals, aggressive industrial fluids
Duplex Steel 2205-40°C to 315°C (-40°F to 600°F)High strength (yield ≥450MPa), excellent corrosion/abrasion resistanceOil & gas production, desalination, mining slurries, high-sulfur media
Si3N4 Ceramic (Silicon Nitride)-40°C to 450°C (-40°F to 842°F)Extreme wear/corrosion resistance, high hardness (HV 1500), low frictionHigh-abrasion slurries, strong acids/alkalis, high-temperature fluids
Inconel 625-20°C to 550°C (-4°F to 1022°F)Exceptional high-temperature corrosion resistance, oxidation resistancePetrochemical refining, high-temperature steam, molten media

*Material certification available upon request (including mill test reports, EN 10204 3.1/B; ceramic material test certificates).*


Replacement Guidelines & Installation Best Practices

When to Replace

  • Surface wear, grooves, or scratches on the seal mating area (depth >0.3mm)

  • Corrosion pitting or material degradation (visible rust, discoloration)

  • Seal leakage related to sleeve runout (runout >0.05mm)

  • Mechanical seal replacement (recommended to inspect and replace sleeve synchronously)

  • Shaft damage prevention (proactive replacement for critical applications every 2-3 years)

Installation & Maintenance Precautions

Pre-Installation Inspection

  1. Verify part number, material, and dimensional fit with Sulzer BBS 200-400 pump shaft (reference pump maintenance manual).

  2. Check for transportation damage (chips, cracks) and ensure seal mating surface is smooth (no burrs, scratches, or corrosion).

  3. Measure sleeve inner diameter and shaft outer diameter to confirm fit tolerance (sliding fit: 0.01-0.03mm clearance; interference fit: -0.01 to -0.02mm).

  4. Confirm surface finish (Ra ≤ 0.8 μm) with a profilometer (critical for seal performance).

Installation Process

  1. Thoroughly clean the pump shaft and sleeve inner bore—remove rust, debris, or old lubricant/residue.

  2. For sliding fit: Apply a thin layer of anti-seize compound (compatible with material) to the shaft, then slide the sleeve onto the seal side until fully seated against the shaft shoulder.

  3. For interference fit: Heat the sleeve to 80-100°C (176-212°F) using an oven or heat gun (avoid open flame) to expand the inner diameter, then slide onto the shaft and align with the keyway.

  4. Allow the sleeve to cool to ambient temperature (if heated) and verify no movement or misalignment.

  5. Deburr the sleeve edges (especially the seal mating end) to prevent damage to the mechanical seal.

Post-Installation Validation

  1. Measure runout at the seal mating surface (≤0.05mm) using a dial indicator to ensure concentricity.

  2. Perform a static rotation test to confirm no contact between the sleeve and seal housing.

  3. Install the mechanical seal per manufacturer's instructions, ensuring proper seating on the sleeve's mating surface.


Why Choose HYRIG's 1210-200400 Shaft Sleeve (Seal Side)?

  • Seal-Perfect Fit: CNC-machined to match Sulzer BBS 200-400's original shaft dimensions and mechanical seal requirements—no modifications required.

  • Dual Protection: Shields the pump shaft from corrosion, friction, and abrasion while providing a precision mating surface for mechanical seals.

  • Seal Compatibility: Optimized surface finish and concentricity ensure leak-free operation with all standard cartridge mechanical seals (HYRIG/Sulzer Original).

  • Direct Replacement: Meets or exceeds Sulzer original specifications for dimensional accuracy, wear resistance, and API 610 compliance.

  • Quality Assurance: 12-month warranty against material defects and manufacturing errors; technical support for fit verification and installation guidance.


Order & Inquire

For pricing, material availability, lead time, or custom material requests (e.g., extreme temperature/corrosion resistance), contact HYRIG's technical sales team:

Email: info@hyrig.com

Please provide your pump's serial number, operating conditions (media, temperature, pressure, solids content), and mechanical seal model for personalized recommendations and a detailed quote.


Note: HYRIG's 1210-200400 shaft sleeve (seal side) is a drop-in alternative to Sulzer original parts, designed to meet or exceed API 610 performance and reliability standards. All units are packaged in protective materials to prevent surface damage during transit.


Name:
Message:
Verification code:
Submit
Comment