The Sulzer OHH pump is an API 610 (ISO 13709) Type OH2 overhung, horizontal, single stage, centerline mounted, radially split process pump. It is widely used in refinery, petrochemical, fertilizer plant, gas processing and offshore oil production services. When applied to ammonia water, aqueous ammonia and liquid ammonia service, the OHH provides reliable, leak-tight performance meeting the stringent requirements of modern fertilizer and green ammonia plants.
As an OH2 type pump, the OHH features a radially split casing with end-suction, top-discharge configuration. The centerline mounting accommodates thermal expansion across a wide temperature range from -75°C to +425°C, critical for handling low-temperature ammonia and aqueous solutions. The back pull-out design allows removal of the rotating assembly without disturbing piping or driver, significantly reducing maintenance downtime.
The Sulzer OHH provides an ideal solution for ammonia water, liquid ammonia transfer and aqueous ammonia circulation, delivering rugged reliability, broad hydraulic coverage and ease of maintainability for continuous plant operation.
| Feature | Benefit for Ammonia Service |
|---|---|
| API 610 Type OH2 compliance | Fully compliant with ISO 13709 for heavy-duty process applications |
| Centerline mounting | Uniform thermal expansion from -75°C to +425°C |
| Back pull-out design | Rotating assembly removal without disturbing piping |
| Finned bearing housing with fan cooling | Long bearing life even in continuous refrigeration duty |
| Heavy-duty baseplate | Designed for 2× ISO 13709 (API 610) nozzle loads |
| ISO 21049 (API 682) cartridge seals | Reduced fugitive emissions |
| Rigid shaft with minimal deflection | Extends mechanical seal and bearing life |
| 11,000 standard NSS | Improved low NPSH performance |
| 300# flange standard (600# optional) | Compatible with ammonia system requirements |
| Parameter | OHH Pump Range |
|---|---|
| Capacities | Up to 2,250 m³/h / 10,000 US gpm |
| Heads | Up to 360 m / 1,200 ft |
| Pressures | Up to 75 bar / 1,100 psi |
| Temperatures | -75°C to +425°C / -100°F to 800°F |
| Discharge sizes | 25 to 400 mm / 1 to 16 inches |
| Maximum speed | Up to 3,600 rpm |
| Component | Recommended Material | Alternative |
|---|---|---|
| Casing | Carbon steel (WCB) or 304SS | 316L SS |
| Impeller | 12% Chrome steel or 304SS | 316L SS |
| Shaft | 17-4PH stainless steel | Duplex |
| Wear rings | Hardened 12% Cr with Stellite facing | Silicon carbide |
| Bolting | A193 B7 or B8M | A193 B8M Class 2 |
| Gaskets / O-rings | PTFE or EPDM (aqueous) | FFKM (Kalrez) |
Material compatibility note: Most metals and non-metals experience only slight corrosion in liquid ammonia (anhydrous) and ammonia water (ammonium hydroxide). Only copper and copper alloys should not be used.
| Service | Recommended Seal Arrangement | Flush Plan |
|---|---|---|
| Liquid ammonia (anhydrous, toxic) | Double mechanical seal (pressurized) | Plan 53B |
| Ammonia water / aqueous NH₃ (mild) | Single mechanical seal | Plan 11 |
| Low-temperature ammonia (-30°C) | Single or tandem seal | Plan 11 or Plan 52 |
| High-head / high-pressure ammonia | Double seal with pressurized barrier fluid | Plan 53B |
The Sulzer OHH pump is selected for ammonia and ammonia water service under the following conditions:
Liquid ammonia feed service (P-101 in green ammonia plant): OH2 fitted for moderate head, reliable leak-tight operation
Ammonia water transfer: OH2 constructed with 316L SS for corrosion resistance
Aqueous ammonia circulation: OH2 with single mechanical seal Plan 11
Fertilizer plant ammonia service: OH2 with double seal Plan 53B for zero ammonia leakage
Refrigeration ammonia circulation: OH2 or OH6 high-speed option depending on flow/head requirements
The Sulzer OHH pump is utilized across multiple heavy process industries:
Fertilizer plants: Ammonia synthesis feed pump, ammonia water transfer, aqueous NH₃ circulation
Green ammonia facilities: Ammonia feed pump, lean/rich solution circulation
Refining and petrochemical: Ammonia injection, sour water stripping
Chemical processing: Ammonium hydroxide transfer
Water treatment: pH adjustment via ammonia injection
Offshore platforms: Chemical injection, including monoethylene glycol, methanol and ammonia
Full API 610 11th Edition (ISO 13709) compliance
Broadest ISO 13709 range map in the industry
Back pull-out design for easy maintenance without disturbing piping
API 682 cartridge mechanical seals for zero ammonia emission
Low NPSH design: 11,000 NSS standard with improved suction optional
Wide temperature range: -75°C to +425°C
Electric motor or steam turbine drivers for critical pump applications
300# standard flange rating (600# optional) for system compatibility
| Parameter | Specification |
|---|---|
| Pump Type | API 610 Type OH2 — overhung, horizontal, centerline mounted, single stage, radially split |
| Standard | API 610 (ISO 13709) with API 682 seals |
| Medium | Liquid ammonia (anhydrous), ammonia water (aqueous NH₃), ammonium hydroxide |
| Capacities | Up to 2,250 m³/h |
| Heads | Up to 360 m |
| Temperature | -75°C to 425°C |
| Pressure | Up to 75 bar / 1,100 psi |
| Mounting | Centerline mounted |
| Seal | API 682 cartridge mechanical seals (Plan 11/52/53B) |
| Maintenance | Back pull-out design |
For more information or a custom proposal for your ammonia water pump (Sulzer OHH) application, please contact us at:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.