This guide covers API 610 (12th Edition, 2020) and ISO 13709 compliant pump selection for green ammonia plants, urea units (180 kt/y), calcium ammonium nitrate (CAN) units (300 kt/y), and geothermal/utility systems. All selections adhere to API 682 mechanical seals, with appropriate material classes and driver configurations for 25‑year continuous operation.
The following table lists the primary pump types, typical tag numbers, services, and operating conditions for a standard green ammonia synthesis loop.
| Type | Tag Example | Service | Medium / Conditions |
|---|---|---|---|
| OH2 (single‑stage overhung) | P‑101 | Ammonia synthesis feed pump | Liquid ammonia / 25°C / 2.5 MPa |
| BB2 (single‑stage double suction) | P‑102 | Circulating / process water pump | Water / 40°C / 0.8 MPa |
| BB3 (multistage axially split) | P‑103 | Lean / rich solution pump | Potassium carbonate solution / 120°C |
| BB5 (barrel pump) | P‑104 | High pressure ammonia feed pump | Liquid ammonia / 40°C / 15 MPa |
| VS6 (vertical multistage sump) | P‑105 | Condensate extraction pump | Water / 90°C / 1.2 MPa |
| OH6 (high speed integrally geared) | P‑106 | Ammonia refrigeration circulation | Liquid ammonia / -30°C / 3.0 MPa |
Selection notes for green ammonia:
OH2 (P‑101): Single‑stage overhung pump for moderate head ammonia feed from storage to low‑pressure synthesis loop. Back pull‑out design, API 682 Plan 53B double seal recommended for zero ammonia leakage. Material: 316L SS.
BB2 (P‑102): Single‑stage double suction pump for high flow, low head cooling water. Inherent axial thrust balance, low NPSH. Material: carbon steel or 304SS.
BB3 (P‑103): Axially split multistage pump for hot potassium carbonate circulation. Opposed impeller arrangement provides axial thrust balance. Material: 316L or duplex for hot carbonate corrosion resistance.
BB5 (P‑104): Double casing barrel pump for 15 MPa ammonia feed to high‑pressure reactor. Multistage, radially split, with pull‑out cartridge. Material: 316L or duplex. Supplied with VFD motor and full standby.
VS6 (P‑105): Vertical multistage sump pump for condensate extraction from hot well. Submerged impeller ensures low NPSH. Material: carbon steel or 304SS.
OH6 (P‑106): Integrally geared high speed pump for ammonia refrigerant circulation in low temperature (-30°C) loops. Compact vertical inline, low NPSH, double seal required.
| Pump Type | Tag | Service | Key Requirement |
|---|---|---|---|
| BB2 | P‑201 | Urea solution transfer pump | Clean urea solution at ~80‑120°C; low head |
| BB2 | P‑202 | Carbamate pump | Ammonium carbamate recirculation (moderate pressure) |
| BB3 | P‑203 | High pressure carbamate pump | Multistage for high head, aggressive carbamate |
| BB3 | P‑204 | Hydrolysis feed pump | Hot process condensate feed to hydrolyzer |
| VS4 | P‑205 | Urea melt pump | Molten urea at 135‑150°C; steam jacketed |
| VS4 | P‑206 | Waste water lift pump | Contaminated water sump lift |
Selection notes for urea:
BB2 (P‑201, P‑202): Single‑stage double suction pumps are adequate for moderate pressure urea solution and carbamate duties where head is below 200 m. For carbamate service, wetted parts require super duplex (25% Cr minimum).
BB3 (P‑203, P‑204): Axially split multistage pumps provide the necessary high head for high pressure carbamate feed and hydrolyzer service. Material: super duplex for carbamate; 316L for hydrolysis feed.
VS4 (P‑205, P‑206): Vertical submerged long shaft pumps with steam jackets on casing and column pipe to prevent urea solidification. Open impeller for waste water solids handling. Material: 316L for urea melt; duplex for corrosive waste.
| Pump Type | Tag | Service | Key Requirement |
|---|---|---|---|
| OH2 | P‑301 | Nitric acid pump | Concentrated HNO₃ at ambient to 80°C |
| OH2 | P‑302 | Ammonia water pump | Aqueous NH₃ (10‑25%), mild alkaline |
| BB2 | P‑303 | Process circulation pump | High flow nitrate solution circulation |
| BB2 | P‑304 | Finished product transfer pump | CAN solution to storage/loading |
| BB4 (ring section) | P‑305 | Concentration feed pump | Evaporator feed for nitrate concentration |
Selection notes for CAN:
OH2 (P‑301): Single‑stage overhung pump for nitric acid transfer. Material: 904L super austenitic or Alloy 20 / Hastelloy for high concentration and elevated temperature. Open impeller optional if solids present.
OH2 (P‑302): Ammonia water (ammonium hydroxide) – 316L SS provides corrosion resistance at moderate concentrations.
BB2 (P‑303, P‑304): Double suction pumps for large volume circulation of ammonium nitrate solution. Material: 316L or duplex.
BB4 (P‑305): Ring section (segmental) multistage pump for high head evaporator feed. Tie‑bolt construction, same‑direction impellers. Material: 316L or duplex for nitrate service.
| Pump Type | Service | Key Requirement |
|---|---|---|
| BB1 (axially split single stage) | Geothermal circulation pump, cooling water pump | High flow, low head, brine compatibility |
| VS1 (vertical turbine) | Deep well pump, fire water pump | Submerged wet pit installation, reliable fire protection |
| OH2 | Chemical dosing pump, wastewater pump | Low flow precision dosing, solids handling capability |
Selection notes for utilities:
BB1: Axially split, double suction. For geothermal brine, use duplex stainless steel. For cooling water, carbon steel or 304SS is adequate.
VS1: Vertical multistage turbine pump for deep wells or fire water reservoirs. Materials: fresh water – cast iron / bronze; seawater / corrosive – duplex. NFPA 20 compliance available for fire pump service.
OH2: Chemical dosing – small flow, high head, corrosion resistant alloys (Hastelloy, Alloy 20). Wastewater – open impeller, hard faced wear parts.
Pump design and manufacture: API 610 12th Edition (2020) & ISO 13709
Mechanical seals: API 682 (all categories, arrangements and flush plans)
| Service | Required Material |
|---|---|
| Ammonia / Urea / Potassium carbonate | 316L stainless steel or duplex (2205 / 2507) |
| Nitric acid / Ammonium salts | 904L super austenitic, Alloy 20, or high‑nickel alloys (Hastelloy) |
| Water / Steam / Cooling tower | Carbon steel or low alloy steel (WCB, A216) |
Critical pumps (e.g., high pressure ammonia feed P‑104, high pressure carbamate P‑203, urea melt P‑205): supplied with Variable Frequency Drive (VFD) motors.
Standby arrangement: All essential services shall have 100% spare pump (duty / standby). Non‑critical services may use one operational unit with a shared spare.
Design life: 25 years continuous operation with scheduled maintenance.
| Service | Recommended Seal Arrangement | Flush Plan |
|---|---|---|
| Liquid ammonia (toxic) | Double seal (pressurized) | Plan 53B |
| Ammonia water (mild) | Single seal | Plan 11 |
| Urea / Carbamate (corrosive) | Double seal (pressurized) | Plan 53B |
| Hot water / Condensate (>100°C) | Tandem seal or single with cooler | Plan 21 or Plan 23 |
| Cooling water (clean) | Single seal | Plan 11 |
| Wastewater (dirty) | Single seal with quench | Plan 32 (external flush) or Plan 62 |
| Plant / Unit | Pump Family | Example Services |
|---|---|---|
| Green Ammonia | OH2, BB2, BB3, BB5, VS6, OH6 | Synthesis feed, cooling water, carbonate circulation, HP ammonia, condensate, refrigeration |
| Urea | BB2, BB3, VS4 | Solution, carbamate, HP carbamate, hydrolysis, urea melt, waste water |
| CAN | OH2, BB2, BB4 | Nitric acid, ammonia water, process circulation, product transfer, concentration feed |
| Geothermal & Utilities | BB1, VS1, OH2 | Geothermal circulation, cooling water, deep well, fire water, chemical dosing, wastewater |
For each pump family, refer to API 610 for detailed hydraulic range, nozzle load capabilities, and testing requirements.
For further engineering support or a custom pump specification package for your green ammonia, urea, CAN or geothermal project, please contact us:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.