The Ammonia Water Pump is an API 610 Type OH2 horizontal, single‑stage, overhung, centerline‑mounted centrifugal pump specifically engineered for handling ammonia water (aqueous ammonium hydroxide, NH₃·H₂O or NH₄OH) in chemical processing, fertilizer production, and industrial ammonia handling systems. The pump fully complies with API 610 11th Edition and ISO 13709 standards.
Ammonia water is a moderately alkaline solution formed by dissolving ammonia gas in water. It is widely used in chemical synthesis, fertilizer manufacturing, textile processing, and water treatment. Although ammonia water is less corrosive than many aggressive chemicals, it still requires careful material selection—standard casting iron is adequate for very low concentrations, but stainless steel is recommended for extended service life and higher concentrations-. The OH2 configuration—radially split casing, end‑suction top‑discharge, back pull‑out design—provides reliable, continuous operation with easy maintenance access.
As a specialized China API 610 pump manufacturer, we produce ammonia water pumps with 316L stainless steel wetted parts to ensure corrosion resistance and long service life in demanding chemical environments-.
The pump is specifically engineered for ammonia water and related alkaline services:
Primary Media:
Ammonia water (aqueous ammonium hydroxide) — NH₃ in aqueous solution
Ammonium hydroxide (NH₄OH) — diluted ammonia solution
Ammonia liquor — industrial ammonia water
Ammonium salt solutions — byproduct or process streams
Fluid Characteristics:
Operating temperature: -20°C to +80°C typical; pump design range: -80°C to +450°C-
pH range: 10–12 (mildly alkaline)
Corrosivity: Most metals and non-metals experience only slight corrosion in contact with aqueous ammonia; copper and copper alloys are unsuitable-
Mildly alkaline nature requires stainless steel for extended service life and higher concentration applications; carbon steel may suffice for very low concentrations but 304/316L SS is preferred for corrosion resistance
Material Selection:
| Concentration | Temperature | Recommended Material |
|---|---|---|
| Low (<10%), ambient | Standard cast iron | Cast iron |
| Low (<10%), elevated | 304 or 316 stainless steel | SS304 / SS316 |
| Medium (10–25%) | 316L stainless steel | SS316L- |
| High (>25%), continuous service | 316L stainless steel or duplex | SS316L / Duplex |
| Moderate to high concentrations | 316L stainless steel (best corrosion resistance, long-term exposure) | SS316L- |
Not suitable: Copper, brass, bronze, or galvanized materials — ammonia reacts with copper alloys causing rapid corrosion.
Elastomers: Use EPDM or PTFE for gaskets and O-rings.
| Parameter | Range |
|---|---|
| Flow rate (Q) | 3 ~ 2,600 m³/h- |
| Total head (H) | 4 ~ 300 m- |
| Operating temperature | -80°C ~ +450°C- |
| Design pressure | Up to 5.0–7.5 MPa (API 610 OH2 standard) |
| Speed | 1,450 / 2,950 rpm (50/60 Hz) |
| Flange rating | ASME Class 150 / 300 RF |
| Materials | SS304, SS316L, duplex stainless steel, titanium |
| Seals | API 682 compliant mechanical seals |
| Certification | API 610 11th Edition (ISO 13709) |
Step 1: Define Operating Conditions
Flow rate, total head, operating temperature
Ammonia water concentration
Suction NPSH available
Continuous or intermittent service
Step 2: Select Material Based on Ammonia Water Concentration
Low concentration (<10%, ambient): Cast iron or SS304 adequate
Medium concentration (10–25%): SS304 or SS316
Moderate to high concentration (>25%): SS316L recommended-
Higher temperature or longer service intervals: Upgrade to 316L stainless steel
Step 3: Determine Pump Size and Speed
Single stage OH2 covers most ammonia water transfer duties
Locate rated operating point between 60% and 120% of BEP for best reliability
Refer to manufacturer's performance curve for specific sizing
Step 4: Specify Seal System
Single mechanical seal with API 682 Plan 11 (internal recirculation) sufficient for most ammonia water applications-
Tandem mechanical seal with Plan 52 recommended for zero leakage requirements or higher concentration service
Double mechanical seal with Plan 53B (pressurized barrier fluid) for toxic or high-value media
Step 5: Auxiliary Features
Centerline mounting (standard for OH2) accommodates thermal expansion
Back pull-out design simplifies maintenance without disturbing piping
Minimal flow recirculation protection recommended for extended idle periods
API 682 compliant seal chamber to accept cartridge seals
| Feature | Benefit for Ammonia Water |
|---|---|
| Back pull-out design | Rotating assembly removable without disturbing piping—simplifies maintenance in chemical plants |
| Centerline mounting | Accommodates thermal expansion; prevents misalignment during temperature changes |
| Radially split casing | Robust pressure containment; easy to inspect and clean |
| 316L stainless steel wetted parts | Excellent corrosion resistance for moderate to high concentration ammonia water service- |
| Closed impeller | Dynamically balanced; renewable wear rings extend casing life |
| API 682 seal chamber | Accepts single, tandem, and double mechanical seals; compatible with API 682 Plan 11, 52, 53B |
| Heavy duty shaft | Minimizes deflection, extends seal life |
| Renewable wear rings | Replaceable without changing casing |
| Parameter | Recommendation |
|---|---|
| Pump Type | API 610 Type OH2 — Horizontal, single stage, overhung, centerline mounted |
| Capacity | 5–500 m³/h (application dependent) |
| Head | 15–150 m |
| Temperature | -10°C to +60°C |
| Casing | 304 SS or 316L stainless steel |
| Impeller | 304 SS or 316L stainless steel, closed type |
| Shaft | 17-4PH stainless steel or 316L |
| Wetted hardware | A193 B8M (316 SS) |
| Wear rings | 304 SS with hard facing |
| Mechanical seal | Single mechanical seal, API 682 Plan 11 |
| Seal faces | Silicon carbide vs. carbon |
| Gaskets / O‑rings | EPDM or PTFE |
| Flange rating | ASME Class 150 RF |
| Coupling | Flexible spacer coupling with guard |
| Baseplate | Heavy duty steel, epoxy grouted |
API 610 OH2 ammonia water pumps are essential equipment across multiple industries:
Chemical Plants:
Transfer and circulation of ammonia water in synthesis processes
Feed to ammonia stripping and recovery units
Fertilizer Complexes:
Ammonia water transfer for NOx reduction in nitric acid plants
Circulation in ammonium salt production
Textile Industry:
Ammonia water in fabric mercerizing and processing
Water Treatment:
Ammonia water feed for pH adjustment and disinfection
Transfer in industrial water conditioning systems
Pharmaceutical and Fine Chemical:
Ammonium hydroxide transfer in API manufacturing
Buffer solution circulation
Metal Treatment:
Ammonia water in heat treatment and nitriding processes
Full API 610 11th Edition (ISO 13709) compliance — same international standards as leading global brands
Corrosion resistant alloys — SS304, SS316L, duplex, and stainless steel options available
316L stainless steel capability — recommended for ammonia water service to ensure corrosion resistance and extended service life-
Proven in chemical and fertilizer service — installed in hundreds of plants worldwide
Competitive cost — typically 20–30% lower than major Western brands for equivalent API 610 OH2 configurations
Lead time — 16–24 weeks for standard stainless steel configurations
Complete documentation — performance curves, NPSH curves, GA drawings, API 610 data sheets, material certifications
Factory testing — hydraulic performance test, NPSH test, mechanical run test, vibration monitoring per API 610
Global shipping and export packaging — wooden crates, VCI, desiccant, full export documentation
Spare parts availability — mechanical seals, bearings, wear rings, gaskets stocked for standard sizes
After-sales support — installation and commissioning assistance, training, warranty
| Parameter | Specification |
|---|---|
| Pump Type | API 610 Type OH2 — Horizontal, single stage, overhung, centerline mounted |
| Medium | Ammonia water (aqueous ammonium hydroxide, NH₃·H₂O / NH₄OH) |
| Design temperature | -80°C to +450°C |
| Design pressure | Up to 5.0 MPa (ASME Class 300) |
| Typical capacities | 3–2,600 m³/h |
| Typical heads | 4–300 m |
| Casings | Radially split, end‑suction top‑discharge |
| Impeller | Closed type, dynamically balanced |
| Materials (standard) | SS304 / SS316L (wetted parts) |
| Mechanical seal | Single mechanical seal, API 682 Plan 11 (standard) |
| Seal faces | Silicon carbide vs. carbon |
| Gaskets | EPDM or PTFE |
| Bearing lubrication | Oil ring self‑lubricating |
| Maintenance | Back pull‑out design |
| Certification | API 610 11th Edition (ISO 13709) |
For more information or a custom proposal for your ammonia water pump (aqueous ammonium hydroxide transfer) application, please contact us at:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.