The TEDA KHT13625 (also referred to as KT13625) is a heavy‑duty, open‑type hydraulic casing power tong specifically engineered for making up and breaking out large‑diameter casing connections in oilfield drilling, well servicing, and workover operations. As the largest model in the TEDA KHT series—which includes KHT5500, KHT7625, KHT9625, KHT13625, and KHT14000—the KHT13625 is designed to handle casing up to 13‑5/8″ (346 mm) in diameter. It is fully hydraulic, driven by a high‑efficiency low‑speed high‑torque hydraulic motor that provides the exceptional torque required for large‑diameter, heavy‑wall casing strings.
This casing power tong is built with an open‑type head, allowing quick and convenient entry into and slide‑off from the working position. The integral tong head offers outstanding strength and rigidity, ensuring reliable gripping even under maximum torque loads.
Both the main tong and the back‑up tong adopt a three‑jaw clamping mechanism (double swing head jaws on the master tong, three‑jaw‑plate structure pushed by a hydraulic cylinder on the back‑up tong), which ensures minimal damage to the casing string while providing reliable, uniform gripping.
The KHT13625 features a four‑speed transmission system, providing a wide speed regulation range and high rated torque. The low gear delivers 42,000 N·m (31,000 ft·lbs) of torque at 8.4 RPM for heavy breakout and final make‑up, while the high gear provides 8,400 N·m (6,200 ft·lbs) at 42 RPM for fast spinning. The tong operates at 14 MPa (2,000 psi) with a flow rate of 150 L/min (40 GPM).
The tong includes a brake belt assembly that provides large braking torque, is simple to operate, and is conveniently designed for repair and replacement. An open large gear supporting structure considerably enhances the hardness and rigidity of the open large gear. The shell is fabricated from high‑strength steel plate, providing excellent overall durability; the jaws are manufactured with precision casting and forging technology for superior strength and appearance.
A hydraulic torque indicator is supplied as standard equipment, and an installation interface for a torque turn instrument is available for computerized management and data recording. Additionally, low‑stress components for C.R.A. (corrosion‑resistant alloy) casing are available as an option to protect sensitive threads and prevent galling. The safety door incorporates a hydraulic safety device for enhanced operator protection.
The TEDA KHT13625 is the ideal choice for large‑diameter surface casing running, deep well workover, and offshore drilling platforms handling casing up to 13‑5/8″ OD, where maximum torque, operator efficiency, and casing protection are critical. Its four‑speed transmission system provides extensive speed regulation and high torque output, enabling operators to optimize cycle time while maintaining precise torque control under extreme loads.
Hyrig supplies all TEDA tongs and genuine spares. For inquiries, pricing, or technical support, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.