Gripping Range
| Parameter | Specification |
|---|---|
| Master Tong Gripping Range | 4″ – 13-5/8″ (Φ101 – 346 mm) |
| Backup Tong Gripping Range | 4″ – 15-1/2″ (Φ101 – 394 mm) |
Torque & Speed (4-Speed Gearbox)
| Gear Position | Torque Rating | Rated Speed |
|---|---|---|
| Low Gear | 42,000 N·m (31,000 ft·lbs) | 8.4 RPM |
| High Gear | 8,400 N·m (6,200 ft·lbs) | 42 RPM |
Hydraulic & Operating Parameters
| Parameter | Value |
|---|---|
| Rated Operation Pressure | 14 MPa (2,000 psi) |
| Rated Hydraulic Flow | 150 L/min (40 GPM) |
Dimensions & Weight
| Parameter | Value |
|---|---|
| Master Tong Dimensions (L×W×H) | 1,508 × 857 × 1,194 mm (59.4″ × 33.8″ × 47″) |
| Combined Tong Dimensions (L×W×H) | 1,508 × 1,082 × 1,900 mm (59.4″ × 42.6″ × 74.8″) |
| Master Tong Weight | 650 kg (1,433 lbs) |
| Combined Tong Weight | 1,250 kg (2,750 lbs) |
Other Specifications
| Parameter | Value |
|---|---|
| Motor Type | Low‑speed high‑torque hydraulic motor |
| Gearbox | Four‑speed, wide speed regulation range |
| Clamping Mechanism | Three‑jaw clamp system (master: double swing head jaws + roller-climbing rear jaw; backup: three-jaw-plate pushed by hydraulic cylinder) |
| Brake System | Brake belt assembly with large braking torque |
| Open Gear Structure | Open large gear supporting structure |
| Shell Material | High‑strength steel plate |
| Die Change | Snap‑in, tool‑less |
| Standard Equipment | Hydraulic torque indicator |
| Optional Equipment | Torque control system, interface for torque turn instrument, low‑stress components for C.R.A. casing |
| Safety Feature | Safety door hydraulic safety device |
| Certifications | API Spec 7K / 8C |
Note: The KHT13625 is available in different variants. The TEDA standard configuration is shown above. An alternative high‑speed variant (KT13625-35) offers 47,454 N·m (35,000 ft·lbs) max torque with speeds of 9.1 RPM (low) and 45.6 RPM (high) at 227 L/min (60 GPM) and 2,500 psi.
The TEDA KHT13625 provides exceptional torque capacity and outstanding structural rigidity, ideal for casing running, deep well workover, and offshore drilling platforms handling casing up to 13-5/8″ OD.
Hyrig supplies all TEDA tongs and genuine spares. For technical data, spare parts, or pricing, contact info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.