TEDA KHT14000 Hydraulic Casing Tong – Overview

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The TEDA KHT14000 is a heavy‑duty hydraulic casing power tong for making/breaking connections on 4″ to 14″ OD casing (backup up to 15‑1/2″). Its four‑speed gearbox delivers 100,000 N·m (75,000 ft·lbs) in low gear at 3 RPM and 13,500 N·m (10,000 ft·lbs) in high gear at 24 RPM. Operating at 17.2 MPa (2,500 psi) and 187.5 L/min (50 GPM) , the combined weight is 2,150 kg (4,730 lbs). Features include open‑type integral head, three‑jaw clamping for minimal pipe damage, brake belt assembly, high‑strength steel shell, hydraulic torque indicator, and optional torque control system. Built to API standards. Hyrig supplies all TEDA tongs and genuine spares. Email info@hyrig.com.

Conatct For Details
DetailReview(0)Additional

The TEDA KHT14000 (also referred to as KT14000) is a heavy‑duty, open‑type hydraulic casing power tong specifically engineered for making up and breaking out large‑diameter casing connections in oilfield drilling, heavy workover, and offshore operations. As the largest model in the TEDA KHT series—which includes KHT5500, KHT7625, KHT9625, KHT13625, and KHT14000—the KHT14000 is designed to handle casing up to 14″ (356 mm) in diameter. It is fully hydraulic, powered by a high‑efficiency low‑speed high‑torque hydraulic motor that provides the exceptional torque required for large‑diameter, heavy‑wall casing strings.

This casing power tong is built with an open‑type head, allowing quick and convenient entry into and slide‑off from the working position. The integral tong head offers outstanding strength and rigidity, ensuring reliable gripping even under maximum torque loads.

Both the main tong and the back‑up tong adopt a three‑jaw clamping mechanism—double swing head jaws on the master tong, and a three‑jaw‑plate structure pushed by a hydraulic cylinder on the back‑up tong. This design ensures minimal damage to the casing string while providing reliable, uniform gripping. The optimum tangent‑to‑diameter ratio design ensures reliable clamping and easy slope retreating.

The KHT14000 features a four‑speed transmission system, providing a wide speed regulation range and high rated torque. The low gear delivers 100,000 N·m (75,000 ft·lbs) for heavy breakout and final make‑up, while the high gear provides 13,500 N·m (10,000 ft·lbs) for fast spinning. The low gear runs at 3 RPM and the high gear at 24 RPM. The tong operates at 17.2 MPa (2,500 psi) with a flow rate of 187.5 L/min (50 GPM) . The master tong measures 1,750 × 1,080 × 1,240 mm (69″ × 42.5″ × 48.8″) , and the combined assembly (including backup tong) weighs 2,150 kg (4,730 lbs) .

The tong includes a brake belt assembly that provides large braking torque, is simple to operate, and is conveniently designed for repair and replacement. An open large gear supporting structure considerably enhances the hardness and rigidity of the open large gear. The shell is fabricated from high‑strength steel plate; the jaws are manufactured with precision casting and forging technology for superior strength and appearance. A hydraulic torque indicator is supplied as standard equipment, and an installation interface for a torque turn instrument is available for computerized management and data recording. Additionally, low‑stress components for C.R.A. (corrosion‑resistant alloy) casing are available as an option to protect sensitive threads and prevent galling. The safety door incorporates a hydraulic safety device for enhanced operator protection. An optional electronic torque limiter can further prevent over‑torque conditions.

The TEDA KHT14000 is the ideal choice for large‑diameter surface casing running, deep well workover, and offshore drilling platforms handling casing up to 14″ OD, where maximum torque, operator efficiency, and casing protection are critical. Its four‑gear transmission provides extensive speed regulation and high torque output, enabling operators to optimize cycle time while maintaining precise torque control under extreme loads.

Hyrig supplies all TEDA tongs and genuine spares. For inquiries, pricing, or technical support, please contact us at info@hyrig.com.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit