Complete Technical Overview
The TEDA KHT14000 is the flagship ultra‑high torque hydraulic casing tong in the TEDA KHT series, designed for the most demanding large‑diameter casing, surface casing, conductor pipe, and heavy workover operations in deep well drilling, offshore platforms, and extreme oilfield environments. Built to API 7K standards, it is engineered to efficiently make up and break out the largest casing strings, dramatically reducing manual labor while enhancing thread connection quality and reducing casing column accidents. With a maximum torque rating of 100,000 N·m, the KHT14000 is one of the most powerful hydraulic casing tongs available for handling casing diameters up to 14 inches.
This open‑type power tong features a robust two‑speed rotation system, providing exceptional torque output for the most severe break‑out operations. With a maximum casing diameter capacity of 14″ in the master tong, it is the heaviest set casing tong in the KHT series, suitable for a wide range of well service applications where both main and backup tongs utilize a three‑jaw clamp system to ensure minimal damage to the casing string.
Key Specifications
Model: KHT14000
Application: Making up and breaking out large‑diameter casing and conductor pipe in oil and gas fields
Range of Master Tong: 4″ – 14″ (Φ101 – 356mm) (2 3/8″ 8# to 14″)
Range of Backup Tong: 4″ – 15‑1/2″ (Φ101 – 394mm)
High Gear Rated Torque: 13,500 N·m (10,000 ft·lbs)
Low Gear Rated Torque: 100,000 N·m (75,000 ft·lbs)
High Gear Rated Speed: 24 RPM
Low Gear Rated Speed: 3 RPM
Rated Operation Pressure: 17.2 MPa (2,500 psi)
Rated / Max. Flow: 187.5 L/min (50 GPM)
Master Tong Dimensions (L×W×H): 1,750 × 1,080 × 1,240 mm (69″ × 42.5″ × 48.8″)
Combined Tong Dimensions (L×W×H): 1,750 × 1,080 × 2,050 mm (69″ × 42.5″ × 80.7″)
Master Tong Weight: 1,500 kg (3,300 lbs)
Combined Tong Weight (including Backup Tong): 2,150 kg (4,730 lbs)
Key Features
API 7K Compliant: Manufactured to meet stringent API specifications, ensuring reliability and safety in critical well operations.
Ultra‑High Torque Capacity: Low gear delivers 100,000 N·m (75,000 ft·lbs) of torque at 3 RPM for the most severe break‑out operations, while high gear provides 13,500 N·m (10,000 ft·lbs) at 24 RPM for efficient casing running.
Two‑Speed Gearbox: Provides optimal torque and speed selection across different casing sizes and operational conditions.
Three‑Jaw Clamp System: Both master tong and backup tong feature a three‑jaw clamp mechanism, ensuring even gripping and minimal damage to the casing string. Two front jaws of the master tong are swing type, the rear type is roller climbing type, making disassembly convenient.
Opening Type Design: Integral tong head of great strength and rigidity allows convenient and prompt entry to and departure from the working position, rapid positioning around the casing string.
Brake Belt Assembly: Easy to operate and convenient to maintain and replace, delivering large braking torque with simple operation.
Open Gear Supporting Structure: Improves gear strength and rigidity for extended service life under heavy loads.
High‑Strength Steel Construction: Shell made of high‑strength steel plate; jaws precisely cast with forging technology for maximum durability, strength, and appealing finish.
Hydraulic Torque Indicator: Provided standard with installation interface for optional torque control system to display, record, and control make‑up torque for computerized torque management.
Safety Door Soft Shaft Safety Device: Enhances operational safety on the rig floor, automatically stopping operation when the door is opened for superior crew protection.
Torque Control System Installation Interface (Optional): Standard interface for connecting to torque control and recording systems for precise torque management.
Low Stress Components for C.R.A. Casing (Optional): Available for corrosion‑resistant alloy (CRA) casing applications to prevent galling and ensure thread integrity.
Frequently Asked Questions
Q: What is the maximum torque of the TEDA KHT14000 hydraulic casing tong?
A: Low gear rated torque is 100,000 N·m (75,000 ft·lbs) at 3 RPM. High gear rated torque is 13,500 N·m (10,000 ft·lbs) at 24 RPM. The continuous rated torque at 17.2 MPa system pressure makes the KHT14000 suitable for the most severe casing and conductor pipe make‑up and break‑out operations in deep wells and offshore fields.
Q: Which casing sizes does the KHT14000 cover?
A: The master tong handles casing from 4″ up to 14″ OD (101–356mm). The backup tong extends up to 15‑1/2″ OD (101–394mm), providing versatile coverage for a wide range of well service operations including 9-5/8″, 10-3/4″, 11-3/4″, 13-3/8″, 14″, and 15‑1/2″ casing and conductor pipe.
Q: Is the KHT14000 suitable for CRA (corrosion‑resistant alloy) casing?
A: Yes. Optional low stress components are available specifically for CRA casing applications to prevent galling and maintain thread connection integrity.
Q: What hydraulic power unit is required for the KHT14000?
A: The tong requires a hydraulic power unit delivering 187.5 L/min (50 GPM) flow at 17.2 MPa (2,500 psi) minimum. This high‑capacity requirement is standard on large offshore rigs, deep drilling platforms, and specialized heavy workover units. An optional torque control system can be integrated for precision torque management.
Q: How does the KHT14000 compare to the smaller KHT13625 model?
A: The KHT14000 has a larger master tong range (4″–14″ vs 4″–13‑5/8″) and delivers significantly higher low‑gear torque (100,000 N·m vs 42,000 N·m) at a lower speed (3 RPM vs 8.4 RPM). While the KHT13625 is suitable for most intermediate and surface casing applications, the KHT14000 is designed for the most extreme operations where maximum torque is required for stuck or damaged conductor pipes and the largest casing strings.
Complete Product Introduction for engineers & procurement
The TEDA KHT14000 hydraulic casing tong is the ultimate flagship product in the TEDA KHT series, representing the highest torque capacity available in the KHT line. It is deployed on the largest offshore drilling platforms, deepwater construction vessels, heavy workover units, and deep land rigs worldwide where maximum torque is required for the most demanding casing and conductor pipe operations.
The two‑speed gearbox is engineered for maximum reliability under extreme loads. Low gear operation at 3 RPM provides a massive 100,000 N·m of controlled torque output for breaking out stuck, corroded, over‑torqued, or damaged large casing connections and conductor pipe strings. This low speed high torque combination is essential for the most severe break‑out conditions encountered in deep wells and offshore fields. High gear at 24 RPM delivers 13,500 N·m of torque for efficient running of long casing strings when lower torque is sufficient. The open tong head design with 356 mm opening (14″) enables rapid positioning around the largest casing strings, critical for efficient casing running operations.
The three‑jaw clamp system in both master and backup tongs is a distinguishing feature of the KHT series. Two front jaws of the master tong are swing type, and the rear type is roller climbing type, making disassembly very convenient for rapid jaw replacement when switching between different casing sizes. The open tong head design allows rapid positioning around the casing string, critical for efficient casing running operations, while the integral tong head provides excellent strength and rigidity for demanding field conditions.
A standard hydraulic torque indicator provides real‑time feedback, and an optional full torque control system can be integrated for precise torque measurement, display, recording, and closed‑loop control, essential for premium casing connections. The optional low stress components protect corrosion‑resistant alloy (CRA) casing material from galling during make‑up operations.
The brake belt assembly delivers large braking torque with simple operation, and is easy to maintain and replace. The open gear supporting structure significantly enhances gear hardness and rigidity for extended service life. The high‑strength steel plate shell and precisely cast jaw plates ensure durability under repeated heavy loads.
The KHT14000 is fully compatible with torque‑turn systems and remote control handles. Lengthening guide pole assemblies are also available as options, allowing the backup tong to securely clamp the pipe body for extended reach operations. The safety door with soft shaft safety device stops all operation when opened, providing superior crew protection. Every unit is hydrostatically pressure‑tested and functionally tested before shipment.
This model represents the most powerful option in the KHT series, with significantly higher torque capacity than the KHT13625 (100 kN·m vs 42 kN·m), heavier weight (2,150 kg vs 1,250 kg), larger dimensions, and higher hydraulic requirements, making it the appropriate choice for the largest conductor pipe, surface casing strings in ultra‑deep wells, and severe offshore break‑out operations.
For detailed 2D/3D drawings, operation manual (PDF), spare parts list, or a quotation tailored to your rig‘s hydraulic system, please contact us:
Email: info@hyrig.com
We reply within 24 hours with technical datasheets and best pricing.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.