HYRIG is a professional oilfield wellhead equipment service provider, we supply Yancheng TEDA – a leading API 7K certified hydraulic power tong brand in China. We supply the complete TEDA product line, including sucker rod tongs, tubing tongs, closed‑type tubing tongs, drill pipe tongs, and casing tongs, along with 100% genuine TEDA replacement parts. From model selection and supply to after‑sales service and repair, HYRIG supports your workover, drilling, and completion make‑up / breakout requirements.
1. Sucker Rod Tongs – For CYG16–28 sucker rod make/break
XQ28/1.8Y / XQ29/1.8 – 1.8 kN·m, lightweight, conventional wells
XQ28/2.6Y / XQ29/2.6 – 2.6 kN·m, high torque for stuck/rusty threads
2. Tubing Tongs – Covers 2⅜″–5½″ (Φ60–140mm), open/closed, hydraulic or hydraulic‑pneumatic
3500 Series (XQ89): XQ89/3B / 3C / 3YE for 2⅜″–3½″; XQB89/8A (closed‑type, 8 kN·m high torque for stuck threads)
4500 Series (XQ114): XQ114/6YB, KHT4500 for 2⅞″–4½″ tubing
5500 Series (XQ140): XQ140/12YA, KHT5500 for 2⅞″–5½″ heavy‑duty tubing
3. Drill Pipe Tongs – For 3½″–10″ (Φ127–254mm) drill pipe, high torque, thread protection, deep wells
ZQ127/25Y – universal up to 5½″, 25 kN·m, pure hydraulic
ZQ203 Series:
ZQ203/75X – planetary jaw, thread protection, 5½″–8″
ZQ203/100 – internal ramp, 100 kN·m, 3½″–8″
ZQ203/125 – 125 kN·m extreme torque, 4½″–8″
ZQ254/145X – ultra‑large diameter (4½″–10″), planetary jaw, 145 kN·m maximum torque
4. Casing Tongs – Covers 4″–20″ (Φ101–508mm) casing, pure hydraulic, large diameter heavy duty
TQ245/20Y (KHT7625) – 4″–9⅝″ (Φ101–245mm), 20 kN·m
TQ340/35YA (KHT9625) – 5½″–13⅜″ (Φ140–340mm), 35 kN·m, A‑series reinforced, torque control ready
TQ508/70Y (KHT14000) – 9⅝″–20″ (Φ245–508mm), 70 kN·m, ultra‑large casing
All TEDA tongs supplied by HYRIG are API Spec 7K certified. We offer new units, refurbished tongs, rentals, and technical commissioning.
HYRIG maintains a complete inventory of genuine TEDA factory parts, organized by assembly with original part numbers. All parts are 1:1 matched to model – eliminating non‑standard fit risks.
Mechanical Assemblies:
Jaw assemblies (jaws, jaw carriers, dies, leaf springs – including low‑stress non‑marking dies)
Head / main ring gear assemblies, housing, gearbox (high/low speed)
Door assembly, lift chain assembly, backup tong assembly, guide rail
Hydraulic Parts:
Hydraulic motors (OEM J6K series, etc.), manual/hydraulic control valves, clamping cylinders
High‑pressure hoses, fittings, seals (O‑rings, oil seals, gaskets), torque gauges / sensors
Wear Parts (in stock, fast shipment):
Dies / inserts, friction plates / clutch plates, gears, bearings, pins, springs, balls
Example OEM numbers: Z6-46 (friction plate for XQ114/6B), KHT5500-117 (main gear), 2.6.Z series (for XQ29/2.6)
Control & Safety Components:
Torque indicators, brake assemblies, safety latches, operating handles, limit devices
100% Genuine TEDA – Perfect Fit
All tongs and parts are original TEDA, supplied with factory certificates, API documentation, and parts manuals.
Full Series + Fast Delivery
We stock popular models (XQ89, XQ114, XQ140, TQ245, TQ340, ZQ203, ZQ254) and wear parts. Domestic delivery: 24–48 hours.
Selection & Technical Support
We provide application‑based selection (torque/OD charts), installation & commissioning, maintenance & troubleshooting, and operator training.
After‑Sales Warranty
New tongs: 1 year warranty
Genuine parts: 6 months warranty
On‑site repair, assembly replacement, refurbishment & upgrade available
| Application | Recommended Model(s) |
|---|---|
| Sucker rod – normal | XQ28/1.8Y |
| Sucker rod – stuck/rusty | XQ28/2.6Y |
| Tubing 2⅜″–3½″ – general | XQ89/3YC (lightweight) |
| Tubing 2⅜″–3½″ – stuck threads | XQB89/8A (closed‑type, high torque) |
| Tubing 4½″ | XQ114/6YB |
| Tubing 5½″ – heavy | XQ140/12YA |
| Drill pipe – thread protection (5½″–8″) | ZQ203/75X |
| Drill pipe – stuck threads (5½″–8″) | ZQ203/100 |
| Drill pipe – extreme torque (4½″–8″) | ZQ203/125 |
| Drill pipe – ultra‑large up to 10″ | ZQ254/145X |
| Casing 4″–9⅝″ | TQ245/20Y |
| Casing 5½″–13⅜″ – high torque, torque control | TQ340/35YA |
HYRIG supplies genuine TEDA parts for XQ / XQB / ZQ / TQ series. Below is a summary by tong family:
Sucker Rod Tongs (XQ28/1.8Y, XQ28/2.6Y):
Jaw assemblies, dies, leaf springs, hydraulic motors, control valves, seal kits, ring gears, pins/springs/balls, friction plates (for 2.6Y), lift lugs/chains.
Tubing Tongs (XQ89/3YB/3YC/3YE, XQB89/8A, XQ114/6YB, XQ140/12YA):
Jaw assemblies, ramp rollers, dies, main ring gears, brake bands, hydraulic motors, valve groups, seal kits, detent balls/springs.
*XQB89/8A:* closed head assembly, master jaw, backup dies, gear assembly, drive motor, cylinder assembly.
*XQ114/6YB:* Z6 series – friction plate Z6-46, jaw assembly Z6-69, gears, bearings, seals, clamping cylinder, backup tong.
*XQ140/12YA:* KHT5500 series – main gear KHT5500-117, bearing KHT5500-115, spring KHT5500-147, ball KHT5500-148.
Drill Pipe Tongs (ZQ127/25Y, ZQ203/75X, ZQ203/100/125, ZQ254/145X):
Jaw assemblies, backup dies, hydraulic motors, high/low gears, brake assemblies, valve manifolds, seal kits.
*ZQ203/75X (planetary jaw):* spider assembly, spider dies, gearbox, backup tong, clamping cylinder, hoses & fittings.
*ZQ203/100/125 (internal ramp):* high‑strength dies, high‑torque motors, gears/shafts/bearings, clutch kits, torque gauge parts.
*ZQ254/145X (10″ large):* large spider assembly, heavy‑duty jaw, reinforced gearbox, large cylinder, full bearing & seal kit.
Casing Tongs (TQ245/20Y, TQ340/35YA):
Dual jaw assemblies, casing‑specific dies, synchronized main/backup mechanism, drive motors, control valves, torque gauges, brake bands, centralizers.
*TQ340/35YA:* main ring gear, backup tong, jaw & dies, cylinder assembly, full seal kit, torque sensor parts.
Common Wear Parts (in stock):
Dies/inserts, jaw assemblies, friction/clutch plates, hydraulic motors, clamping cylinders, control valves, gears/bearings/shafts, seal kits/O‑rings/oil seals, pins/springs/balls, hoses & fittings.
Contact Us
For TEDA power tong inquiries, genuine parts orders, technical support, or a customized quotation, please contact:
Email: info@hyrig.com
HYRIG – Your one‑stop authorized source for TEDA hydraulic power tongs and factory‑genuine parts, from sucker rods to 20″ casing.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.