HYRIG KHT9625 / KHT962 Hydraulic Casing Tong – Direct Replacement for 9⅝” Eckel, Weatherford, MOCCY, FARR & GILL

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG KHT9625 (also searched as KHT962 or KHT 962) is an API 7K open-type hydraulic casing tong, engineered as a direct drop-in replacement for 9⅝” models from Eckel, Weatherford, MOCCY, FARR, and GILL. Handles 2⅜”–9⅝” tubing, drill pipe, and casing. Same form, fit, function, and hydraulic interface. Fully interchangeable wear parts. Lower cost, same performance.

Conatct For Details
DetailReview(0)Additional

HYRIG KHT9625 / KHT962 Hydraulic Casing Tong – Direct Replacement for 9⅝” Eckel, Weatherford, MOCCY, FARR & GILL

Upgrade your medium-diameter casing operations with the HYRIG KHT9625 (also searched as KHT962 or KHT 962) – a direct drop-in replacement for industry-standard 9⅝” casing tongs. No modifications, no downtime.

Overview

The HYRIG KHT9625 (commonly referred to as KHT962 or KHT 962) is an API 7K certified open‑type hydraulic power tong built for heavy‑duty makeup and breakout of oilfield tubulars. It is engineered as a direct drop‑in replacement for equivalent 9⅝” models from Eckel, Weatherford, MOCCY, FARR, and GILL, with matching mounting dimensions, hydraulic interfaces, torque output, and operating performance to enable seamless replacement without modification or downtime.

If you are searching for KHT9625 hydraulic casing tong, 9 5/8 casing tong replacement, or a direct alternative for Eckel or Weatherford 9⅝” tongs, the HYRIG KHT9625 is the exact solution you need.

Key Features

1. Full Compatibility & Direct Replacement

  • Identical form, fit, and function with industry‑standard 9⅝” casing tongs.

  • Supports direct swap for Eckel, Weatherford, MOCCY, FARR, and GILL models.

  • Reduces inventory complexity and operational cost.

2. Wide Tubular Handling Range

  • Accommodates tubing, drill pipe, and casing from 2⅜” to 9⅝” on the main tong.

  • Backup tong capacity up to 10½”.

  • Covers most medium‑diameter well servicing applications.

3. High‑Torque Four‑Speed Design

  • Delivers strong low‑speed breakout torque and efficient high‑speed makeup capability.

  • Optimized for consistent performance in tough field conditions.

  • Matches or exceeds equivalent OEM torque specifications.

4. Robust Three‑Jaw Clamping System

  • Dual swinging front jaws and roller‑climbing rear jaw.

  • Provides secure, even clamping with minimal pipe damage.

  • Improves tubular service life and operational safety.

5. Heavy‑Duty Construction

  • Built with high‑strength alloy steel and reinforced structural components.

  • Withstands harsh oilfield environments.

  • Equipped with a reliable braking system for precise control and stable operation.

6. Interchangeable Wear Parts – Lower Operating Cost

  • Jaw dies, hydraulic seals, rollers, pins, bearings, and brake components are fully interchangeable with equivalent OEM models.

  • Simplifies maintenance and lowers long‑term service cost.

Technical Specifications

ParameterHYRIG KHT9625 (KHT962)Equivalent OEM (Eckel, Weatherford, etc.)
ModelKHT9625 / KHT9629⅝” models (e.g., Eckel 9625)
TypeOpen-type hydraulic casing tongOpen-type hydraulic casing tong
Main tong range2⅜” – 9⅝”2⅜” – 9⅝”
Backup tong rangeUp to 10½”Up to 10½”
Max torqueMatches OEM specificationOEM specification
Speeds4-speed4-speed
ComplianceAPI 7KAPI 7K

Compatible Replacement Models

  • Eckel 9⅝” casing tongs (e.g., KT9625 equivalent)

  • Weatherford 9⅝” hydraulic casing tongs

  • MOCCY 9⅝” casing tongs

  • FARR 9⅝” hydraulic tongs

  • GILL 9⅝” casing tongs

Common Wear Parts (Interchangeable with OEM 9⅝” Models)

  • Main and backup tong jaw dies / inserts

  • Hydraulic motor and gearbox components

  • High‑pressure seals, O‑rings and seal kits

  • Rollers, shafts, pins and bushings

  • Brake bands and brake linings

  • Pressure gauges and torque sensors

Applications

  • Oil and gas well workover, completion, and drilling operations

  • Makeup and breakout of 2⅜” – 9⅝” casing, tubing, and drill pipe

  • Direct replacement for legacy 9⅝” hydraulic casing tongs in global field operations

  • Ideal for those looking for KHT9625 workover tong, 9 5/8 casing tong replacement, or Eckel 9⅝” alternative

Why Choose HYRIG KHT9625 / KHT962 Over OEM 9⅝” Casing Tongs?

  • Universal compatibility – direct replacement for Eckel, Weatherford, MOCCY, FARR, and GILL.

  • Same fit and performance – identical mounting, hydraulics, torque, and operation.

  • Lower cost – significant savings on purchase and wear parts.

  • Interchangeable wear parts – jaw dies, seals, bearings, brake components all compatible with OEM models.

  • Simplified inventory – one tong replaces multiple brands.

  • Global support – HYRIG’s worldwide service network ensures fast delivery and technical assistance.

  • Proven quality – API 7K certified, built to strict ISO and industry standards.

Contact Us

Ready to replace your 9⅝” casing tong (Eckel, Weatherford, MOCCY, FARR, or GILL) with the HYRIG KHT9625 (KHT962)? For pricing, availability, or technical support, contact us at info@hyrig.com. We offer global shipping, warranty coverage, and expert installation guidance to keep your operations running smoothly.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit