The TEDA KHT9625 (also referred to as KT9625) is a heavy-duty, open‑type hydraulic casing power tong specifically designed for making up and breaking out large‑diameter casing connections in oilfield drilling, well servicing, and workover operations. As a key member of the KHT series—which includes models such as KHT5500, KHT7625, KHT13625, and KHT14000—the KHT9625 is tailored for casing with a maximum diameter of 9 5/8″. It is fully hydraulic, powered by a low‑speed high‑torque hydraulic motor that provides the torque required for efficient and reliable casing handling.
This power tong features an open‑type head that allows quick and convenient entry into and slide‑off from the working position. The integral tong head offers exceptional strength and rigidity, ensuring reliable gripping even under heavy loads.
Both the main tong and the back‑up tong adopt a three‑jaw clamping mechanism, which ensures minimal damage to the casing string while providing reliable gripping. The front two jaw plates of the main tong are of a swing type, and the rear jaw plate features a roller‑climbing structure, making assembly and disassembly quick and convenient. The back‑up tong is a three‑jaw‑plate structure pushed by a hydraulic cylinder, offering simple yet reliable clamping action.
The KHT9625 features a four‑speed transmission system, providing a wide speed regulation range and high rated torque. The low gear delivers 34,000 N·m (25,000 ft·lbs) of torque for heavy breakout and final make‑up, while the high gear provides 3,600 N·m (2,700 ft·lbs) for fast spinning. The speed ranges from 6.5 RPM in low gear to 65 RPM in high gear, enabling operators to optimize cycle time while maintaining precise torque control.
The tong also includes a brake belt assembly that provides large braking torque, is simple to operate, and is conveniently designed for repair and replacement. An open large gear supporting structure is used, which considerably enhances the hardness and rigidity of the open large gear. The shell is made of high‑strength steel plate, providing excellent overall hardness and durability; the jaws are manufactured with precise casting and forging technology for superior performance and appearance.
A hydraulic torque indicator is provided as standard equipment, and an installation interface for a torque turn instrument is available for computerized management and data recording. Optional equipment includes a torque control system to display, record, and control make‑up torque, as well as low‑stress components for C.R.A. (corrosion‑resistant alloy) casing.
The TEDA KHT9625 is the ideal choice for casing running, deep well workover, and offshore drilling platforms handling casing up to 9‑5/8″ OD, where reliable torque, operator efficiency, and casing protection are critical. Its four‑gear transmission system provides extensive speed regulation and high torque output, enabling operators to optimize cycle time while maintaining precise torque control under heavy loads.
Hyrig supplies all TEDA tongs and genuine spares. For inquiries, pricing, or technical support, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.