The KT20000 Casing Tong is a high-end hydraulic power tong independently developed by Yancheng TEDA Drilling & Production Equipment Co., Ltd. It is specifically designed for oilfield casing make-up and break-out operations, aiming to replace traditional manual and semi-automated equipment while solving three core pain points: low efficiency, poor quality, and high risk.
The tong features a full hydraulic drive + mechanical shift structure, incorporating innovative technologies such as an open-throat design, integrally molded tong head, and double swing head jaws. It accommodates 7″ to 20″ full-size casing and meets the demands of conventional oil & gas wells, ultra-deep wells, shale gas horizontal wells, and high-sulfur gas fields.
The product complies with API Spec 7K drilling equipment standards and is 100% domestically manufactured. It matches or exceeds international first-tier brands in performance, reliability, and cost-effectiveness, and has become the preferred choice for major domestic oilfields and drilling engineering companies.
| Parameter | Value | Remarks |
|---|---|---|
| Model | KT20000 | Hydraulic casing power tong |
| Applicable casing sizes | 7″, 7 5/8″, 8 5/8″, 9 5/8″, 10 3/4″, 11 3/4″, 13 3/8″, 16″, 18 5/8″, 20″ | 10 sizes; requires matching jaws |
| Overall dimensions (L×W) | 2100 mm (83 in) × 1300 mm (51 in) | Lightweight design for easy lifting and movement |
| Weight (with spring lift assembly) | 1620 kg (3571 lb) | Balanced strength and rig floor load capacity |
| Torque arm length | 51.6 in | Ensures torque measurement accuracy |
| Protection rating | IP54 | Dust and water resistant for harsh wellsite environments |
| Operating temperature range | -40°C to 60°C | Stable operation in extreme cold and heat |
| Parameter | High Gear | Low Gear | Application |
|---|---|---|---|
| Max speed (at 35 GPM / 132 LPM) | 23 rpm | 3 rpm | High gear: fast thread engagement; Low gear: high torque tightening/loosening |
| Torque range (at 2610 psi / 18 MPa) | 7500 ft·lb (10,000 N·m) | 50,000 ft·lb (70,000 N·m) | High gear: conventional wells; Low gear: ultra-deep wells / high-pressure formations |
| Hydraulic requirements | Flow: 35 GPM (132 L/min); Pressure: 2610 psi (18 MPa) | Hydraulic power unit must meet these specifications | |
| Shift method | Mechanical shifting | Easy operation, smooth and impact-free gear changes |
| Feature | Specification | Advantage |
|---|---|---|
| Torque control | Optional torque control system (display/recording/control); Torque gauge range 0-60,000 ft·lb | Thread connection accuracy ≤±2%; enables intelligent management |
| Jaw design | Double swing head jaws, precision casting | Stable grip, easy replacement, wear-resistant and durable |
| Safety protection | 11 safety protections (door interlock, overload protection, etc.) | Zero-accident design protects personnel and equipment |
| Continuous operation capability | Up to 28 days fault-free operation (tested) | Suitable for factory-style, large-scale operations |
| Well Type | Recommended Setting |
|---|---|
| Conventional oil/gas wells (≤3000 m) | High gear – balances efficiency and quality |
| Ultra-deep wells (>5000 m) / High-pressure formations | Low gear high torque mode – ensures thread tightening |
| Shale gas horizontal wells | Lightweight design + flexible suspension system – adapts to long horizontal sections |
| Casing Size | Recommended Gear |
|---|---|
| Small casing (7″ – 9 5/8″) | High gear for higher efficiency |
| Large casing (13 3/8″ – 20″) | Low gear high torque – secure grip and thread tightening |
| Environment | Recommendation |
|---|---|
| Extreme cold (-40°C to 0°C) | Use low-temperature hydraulic oil and grease; preheat hydraulic system before start |
| High-sulfur gas fields | Core components made of sulfur-resistant alloy – suitable for corrosive environment |
All parameters have been tested by third-party accredited institutions – measured data consistent with specifications
Customization services available (hydraulic pressure, torque range, etc. can be adjusted for special conditions)
Free torque gauge calibration and key parameter measurement component calibration during warranty period
Technical team provides parameter interpretation and selection guidance – avoid operational issues caused by mismatched parameters
For inquiries, technical support, or to request a quotation, please contact us:
info@hyrig.com
We are committed to providing high-quality casing tongs and professional support for your oilfield operations.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.