The Teda TQ245/20 is a heavy‑duty, open‑type hydraulic power tong specifically engineered for making and breaking large‑diameter casing connections in oilfield drilling, well servicing, and workover operations. The “245” indicates a maximum gripping diameter of 245 mm (approx. 9.7 inches) , while the “20” represents its maximum torque rating of 20 kN·m (approx. 177,000 in·lb) , positioning it as a high‑torque casing tong suitable for intermediate and production casing strings.
This power tong is driven by a low‑speed, high‑torque hydraulic motor directly coupled with a manual directional valve, ensuring a compact, reliable, and field‑friendly assembly. The unit is supplied as a combination of a main tong and a hydraulic back‑up tong. By operating the directional valve on the main tong, the back‑up tong automatically clamps and releases the casing coupling in perfect synchronization – eliminating the need for separate controls and enhancing operator safety.
Both the main tong and the back‑up tong feature an inner‑curve cam roller climbing mechanism with a multiple‑jaw design for bi‑directional gripping. To reverse the rotation direction, the operator simply turns the direction knob on both tongs. Interchangeable snap‑in dies allow the same tong to handle casing sizes from 7″ to 9‑5/8″ , and optional dies can extend the range to larger diameters.
The TQ245/20 offers two mechanical speed ranges: low gear delivers the full 20 kN·m torque for initial breakout or final make‑up on heavy casing connections, while high gear enables faster spinning to run casing in or out efficiently. This two‑speed design optimizes cycle time while maintaining precise torque control.
Key features include:
High torque capacity (20 kN·m) – suitable for intermediate and production casing
Large gripping range up to 245 mm (9.7″) – handles common casing sizes 7″ to 9‑5/8″
Automatic hydraulic back‑up tong – sync clamping and releasing, no foot valve
Bi‑directional gripping – quick direction change via rotation knob
Tool‑less die change – snap‑in dies for different casing sizes
Two‑speed transmission – balance of heavy breakout and fast spinning
Rugged construction – designed for onshore and offshore casing running operations
API compliant – meets API Spec 7K / 8C standards
The Teda TQ245/20 is the ideal choice for casing running on drilling rigs, workover units, and well servicing operations handling casing up to 9‑5/8″ OD, where reliable torque, efficient make‑up/breakout, and casing protection are essential.
Hyrig supplies all Teda tongs and genuine spares. For inquiries, pricing, or technical support, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.