TQ245/20Y Open-Type Hydraulic Casing Power Tong – Full Technical Introduction

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The TQ245/20Y is an open-type hydraulic casing power tong with pure hydraulic drive (Y) – no compressed air required. Model: TQ=casing tong, 245=9⅝″ max OD, 20=20 kN·m low gear torque, Y=pure hydraulic. Fits Φ101–245mm (4″,4½″,5″,5½″,6″,6⅝″,7″,7⅝″,8″,9⅝″) casing. Low gear: 20 kN·m @9 r/min (breakout/make-up). High gear: 3.25 kN·m @56 r/min (spinning). Working pressure 12 MPa, flow ≥120 L/min. Double jaw swinging clamping with brake band and centralizer. Integrated main & backup tong, combo weight 820 kg. Ideal for conventional wells, no-air sites, and J55/K55/N80/L80 casing.

Conatct For Details
DetailReview(0)Additional

TQ245/20Y Open-Type Hydraulic Casing Power Tong – Full Technical Introduction

The TQ245/20Y is a medium‑diameter, open‑type hydraulic casing power tong designed specifically for making up and breaking out casing connections in conventional drilling and workover operations. With pure hydraulic drive (Y suffix) – no pneumatic components – this tong operates reliably on well sites without compressed air, simplifying rig floor equipment and reducing failure points.

Model Decoding (Per SY/T 5074 & API 7K):

  • TQ – Casing power tong (T = casing/tubing, differentiates from ZQ drill pipe tong and XQ workover tong)

  • 245 – Maximum casing OD: 245 mm (9⅝″)

  • 20 – Low gear rated torque: 20 kN·m (20,000 N·m)

  • Y – Pure hydraulic drive (no air assistance – all functions hydraulic: rotation, clamping, shifting, braking)

  • Open‑type, double jaw clamping, integrated main + backup tong

Key Technical Specifications:

ParameterLow Gear (Make-up/Breakout)High Gear (Spinning)
Torque (rated)20,000 N·m (20 kN·m)3,250 N·m (3.25 kN·m)
Speed≈9 r/min≈56 r/min
Working Pressure (hydraulic)12 MPa12 MPa
Flow Rate≥120 L/min≥120 L/min
Main Tong Applicable ODΦ101–245 mm (4″ – 9⅝″)Same
Backup Tong Applicable ODΦ114–270 mm (4½″ – 10⅝″)–
Casing TypesJ55, K55, N80, L80, etc.Same
Jaw TypeDouble jaw swinging clamping – open‑type, optimized radial grip, non‑slip, no casing damage
StructureOpen‑type, main + backup integrated (can be engaged/disengaged without lifting casing string)
Braking & CentralizingBrake band + upper/lower centralizer – prevents pipe rotation/offset, protects threads
Weight – Main Tong500 kg
Weight – Combo (Main+Backup)820 kg (lightweight, easy rig floor movement)
Dimensions – Main Tong1500×630×650 mm
Dimensions – Combo1500×700×1550 mm (L×W×H)
StandardsAPI Spec 7K, SY/T 5074

Core Features & Advantages (Why Search for TQ245/20Y?):

  1. Pure Hydraulic Drive (Y) – No Air Source Required
    All functions – rotation, jaw clamping, gear shifting, and braking – are hydraulically powered. This eliminates the need for compressed air, making the TQ245/20Y perfect for remote well sites, air‑limited rigs, or operations where pneumatic systems are unreliable. Simply connect a hydraulic power unit (≥120 L/min @12 MPa) and work.

  2. Open‑Type + Double Jaw Swinging Clamping – Fast & Safe
    The open jaw design allows the tong to be placed onto or removed from the casing string without lifting the pipe. The double jaws synchronously swing inward to grip the casing with optimized radial force – no slipping, no crushing, no damage to the casing outer wall or threads. A brake band and upper/lower centralizer further prevent pipe rotation and offset during make-up/breakout.

  3. Two-Speed Gear Shift – Spin Fast, Torque Strong

    • High gear (56 r/min, 3.25 kN·m) – Rapid spinning for casing make‑up, greatly improves running speed.

    • Low gear (9 r/min, 20 kN·m) – High torque for final make‑up or breakout, handles tight connections.
      Gear shifting is performed on‑the‑fly without stopping the tong.

  4. Integrated Main & Backup Tong – One Tool, Complete Operation
    The combo unit integrates the main (rotating) tong and backup (holding) tong. The backup secures the lower casing string while the main tong applies torque to the connection – eliminating casing twist and protecting threads. Replaces manual tongs, catheads, and spinning ropes, reducing manpower and improving rig floor safety.

  5. Lightweight & Compact – Ideal for Conventional Rigs
    At only 820 kg for the combo unit, the TQ245/20Y is easy to move, position, and store on conventional drilling and workover rigs. Its compact dimensions (1500×700×1550 mm) fit standard wellhead areas.

  6. Optional Torque Control System
    Can be equipped with torque gauge / torque sensor for real‑torque display, control, and data recording – essential for precise casing make‑up to prevent over‑torque or under‑torque, ensuring casing string integrity.

Applications:

  • Onshore conventional wells, shallow to medium‑depth wells, conventional drilling rigs

  • Running casing / pulling casing – make‑up and breakout for 4″ through 9⅝″ casing

  • Standard steel grades: J55, K55, N80, L80

  • Well sites with no compressed air supply, limited space, or where lightweight equipment is preferred

TQ Series Medium‑Diameter Casing Tong Comparison (Core Selection):

ModelLow Gear Torque (kN·m)DriveApplicable OD (mm)Combo Weight (kg)Core Positioning
TQ245/20Y20Pure hydraulic (Y)101–245 (4″ – 9⅝″)820Medium diameter, pure hydraulic, conventional torque – all‑around workhorse
TQ340/35Y35Pure hydraulic (Y)140–340 (5½″ – 13⅜″)1020Large diameter, higher torque, for 13⅜″ casing
TQ508/70Y70Pure hydraulic (Y)245–508 (9⅝″ – 20″)1700Ultra‑large diameter, extreme torque, for deep/ultra‑deep wells

Selection Guide:

  • Choose TQ245/20Y if you need: 4″–9⅝″ casing range, 20 kN·m torque, pure hydraulic operation (no air), lightweight (820 kg), and conventional well applications.

  • Choose TQ340/35Y if you work with larger casing (up to 13⅜″) and need 35 kN·m torque.

  • Choose TQ508/70Y for 9⅝″–20″ ultra‑large casing, deep wells, and extreme make‑up torque requirements.

Contact Us
For detailed technical specifications, pricing, spare parts, torque control system options, or to order the TQ245/20Y or any other TQ series casing tong, please contact:
Email: info@hyrig.com

TEDA – Your reliable partner for hydraulic power tongs and oilfield equipment – from sucker rods to large casing and drill pipe tongs.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit