Model XQB178/8 represents a heavy-duty closed-head hydraulic power tong purpose-built for make-up and break-out operations on tubing and small casing in oilfield workover and well service environments. Marketed as an equivalent to the 58-93R Closed-Head power tong, it is recognized as a safe and accurate unit for tubing and casing ranging from 1-5/16″ O.D. through 7″ O.D., with a maximum gripping diameter of 178 mm (7″).
A key distinguishing feature of the XQB178/8 is its roller chain drive design at the tail end. This transmission choice, combined with an adjustable friction clutch, allows shift-on-the-fly operation without stopping. This not only improves the service life of transmission units but also provides integrated overload protection. The chain drive is where the “/8” suffix differentiates this base model from its counterparts—the XQB178/8A and XQB178/16A (gear-drive units).
The closed-head architecture is the defining feature of this series, offering several distinct advantages:
Enhanced Alignment Accuracy: The fully enclosed design ensures precise alignment during make-up and break-out, reducing the risk of thread damage and cross-threading.
Durability and Protection: All moving components are encased within the transmission case, protecting them from external contaminants such as mud, sand, and debris—this makes the tong less susceptible to oilfield environmental damage and extends its service life.
Simplified Operation: Unlike open-head designs that rely on lateral entry, the closed-head XQB178/8 is threaded onto the pipe string before operation. While this requires the tong to be pre-positioned on the pipe, it ensures consistent alignment and eliminates misalignment risks during clamping.
Within the XQB178 series, the transmission type is a critical differentiator:
| Model | Transmission | Key Characteristics |
|---|---|---|
| XQB178/8 | Chain Drive | No need to stop when shifting; adjustable friction clutch provides overload protection; smoother shifting under load |
| XQB178/8A | Gear Drive | Simplified mechanical structure; easier maintenance and better protection from contaminants |
| XQB178/16A | Gear Drive | Higher torque capacity (16,000 N·m low gear) |
The XQB178/8’s chain drive offers distinct operational benefits, including shift-on-the-fly capability and built-in clutch overload protection that helps prevent equipment damage.
The XQB178/8 is equipped with a two-speed transmission providing a large gear ratio differential—significantly faster in high gear and much higher torque in low gear:
| Parameter | High Gear | Low Gear |
|---|---|---|
| Rated Torque | 1,763 N·m (1,300 ft·lbs) | 8,100 N·m (6,000 ft·lbs) |
| Max RPM | 126 RPM | 27 RPM |
| Rated Pressure | 14 MPa (2,000 psi) | |
| Rated Flow | 127 L/min (33.5 GPM) | |
| Dimensions (L×W×H) | 1,295 × 762 × 660 mm (51″ × 30″ × 26″) | |
| Combined Weight | 455 kg (1,000 lbs) |
The XQB178/8 incorporates several advanced features that enhance reliability, durability, and operator safety:
Lubricating Device: Ensures sufficient lubrication of all moving parts and provides an absolute seal, critical for longevity in continuous operation.
Safety Torque Arm: High-strength design delivers reliable torque reaction and protects the operator during operation.
Hydraulic Backup Tong: Utilizes a hydraulic cylinder for clamping, which automatically synchronizes with the main tong and reduces damage to the pipe body.
Optional Hydraulic Spring Lift Bucket: Allows the tong to be adjusted to any operating position on the rig floor.
Imported Components: The drive motor, hydraulic control valves, and backup reversing valve are adapted from imported assemblies for consistent and reliable performance.
The TEDA XQB178/8 chain‑drive closed-head hydraulic power tong is a specialized tool for precise make‑up and break‑out of 1‑5/16″ to 7″ tubing and casing strings. Its closed-head design ensures superior pipe alignment and reduces thread damage. The chain‑drive transmission with friction clutch provides shift‑on‑the‑fly convenience and built‑in overload protection. The combination of closed-head construction, hydraulic backup tong, two‑speed gearbox, and comprehensive safety features delivers safe, accurate, and reliable performance for workover and well service operations.
Hyrig supplies all TEDA tongs and genuine spares. For inquiries, pricing, or technical support, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.