Complete Technical Overview
The TEDA XQB178/8 is a heavy‑duty closed mouth (closed head) hydraulic power tong, specially developed for making up and breaking out tubing and casing (1‑5/16″ through 7″ OD / Φ33.3‑178mm) during oilfield well and offshore well servicing operations. It is a safe and accurate unit applicable to all kinds of complicated workover operations, with a maximum torque exceeding 8,100 N·m.
The XQB178/8 is the chain‑drive variant of the XQB series (the XQB89/8A and XQB178/8A use gear‑drive transmission). The chain‑drive design allows the operator to shift between high and low gears without stopping the tong, significantly improving operational efficiency when frequent speed changes are required on the rig floor.
The compact and closed head design encases all moving parts within the transmission housing, making them less vulnerable to environmental damage and field impacts, while also ensuring better alignment of the tube and more accuracy of make‑up.
Key Specifications
Model: XQB178/8
Application: Tubing and casing make‑up / break‑out in workover
Master Tong Range: 1‑5/16″ – 7″ (Φ33.3 – 178mm)
Backup Tong Range: 1‑5/16″ – 6‑1/8″ (Φ33.3 – 155.6mm)
High Gear Rated Torque: 1,763 N·m (1,300 ft·lbs) @ 14 MPa
Low Gear Rated Torque: 8,100 N·m (6,000 ft·lbs) @ 14 MPa
High Gear Rated Speed: 126 RPM
Low Gear Rated Speed: 27 RPM
Rated Operation Pressure: 14 MPa (2,000 psi)
Rated Flow: 127 L/min (33.5 GPM)
Dimensions (L×W×H): 1,295 × 762 × 660 mm (51″ × 30″ × 26″)
Weight (including Backup Tong): 455 kg (1,000 lbs)
Key Features
Closed Mouth (Closed Head) Design: The closed head structure encases all moving parts within the transmission housing, making them less vulnerable to environmental damage and extending the service life of the tong. It also ensures better alignment of the tube and greater make‑up accuracy.
Chain‑Drive Transmission: Unlike the gear‑drive XQB89/8A and XQB178/8A models, the XQB178/8 utilizes a roller chain drive at the tail end with an adjustable friction clutch, allowing shifting between gears without stopping the tong.
Two‑Speed Operation for Torque and Speed Flexibility: Delivers a significant differential between high and low gears: high gear provides 1,763 N·m of torque at 126 RPM for efficient running of long pipe strings; low gear delivers 8,100 N·m at 27 RPM for heavy‑duty break‑out operations.
Adjustable Friction Clutch & Overload Protection: Using an adjustable friction clutch enables shift‑on‑the‑fly operation, improves the service life of transmission parts, and provides overload protection.
Lubricating Device: Ensures sufficient lubrication of all moving parts and absolute seal, reducing wear and extending component life.
Hydraulic Cylinder Clamping for Backup Tong: The backup tong adopts cylinder clamping, which reduces damage to the pipe while maintaining secure grip.
High Strength Safety Torque Arm: Provides robust protection against torque reaction during heavy make‑up and break‑out operations.
Optional Hydraulic Spring Lift Bucket (Hydraulic Suspension): Can be equipped to satisfy any operation position, allowing precise height adjustment on the rig floor.
Interlocking Safety Door: Enhances operational safety on the rig floor.
Long Service Life: Constructed with durable materials and an enclosed drive system, the XQB178/8 delivers extended operational lifespan under rigorous workover conditions.
Frequently Asked Questions
Q: What is the maximum torque of the TEDA XQB178/8 hydraulic closed head tong?
A: Low gear rated torque is 8,100 N·m (6,000 ft·lbs) at 27 RPM. High gear rated torque is 1,763 N·m (1,300 ft·lbs) at 126 RPM. System pressure is 14 MPa (2,000 psi), and rated flow is 127 L/min (33.5 GPM).
Q: Which pipe sizes does the XQB178/8 cover?
A: The master tong handles tubing and casing from 1‑5/16″ up to 7″ OD (Φ33.3‑178mm). The backup tong covers 1‑5/16″ up to 6‑1/8″ OD (Φ33.3‑155.6mm), making it suitable for a wide range of tubing and small casing workover operations.
Q: What are the differences between XQB178/8 and XQB178/8A?
A: The XQB178/8 uses a chain‑drive transmission that allows shifting between gears without stopping the tong. The XQB178/8A uses a gear‑drive transmission with a simpler mechanical structure for easier maintenance. Both models share the same torque, speed, and pipe range specifications.
Q: Why choose a closed head tong for workover operations?
A: Closed head tongs enclose all moving parts inside the transmission case, protecting them from field debris and damage. This design improves reliability, reduces maintenance, and delivers a longer service life compared to open designs. The closed head also ensures better alignment of the tube for more accurate make‑up.
Q: What hydraulic power unit is required?
A: The XQB178/8 requires a hydraulic power unit delivering 127 L/min (33.5 GPM) flow at 14 MPa (2,000 psi). This is compatible with most standard workover rig power packs.
Q: Does the XQB178/8 have overload protection?
A: Yes. The adjustable friction clutch provides overload protection, automatically relieving excessive torque and improving the service life of transmission parts.
Complete Product Introduction for engineers & procurement
The TEDA XQB178/8 hydraulic closed head tong is a heavy‑duty power tong designed for demanding workover and well service operations involving tubing and casing from 1‑5/16″ to 7″ OD. The closed head design distinguishes it from conventional open‑type tongs: all transmission and moving parts are housed inside a sealed, robust case, dramatically reducing the risk of damage from mud, debris, or accidental impact during field work. This robust construction leads to a longer operational lifespan and significantly reduced downtime for repairs.
The XQB178/8 incorporates a chain‑drive transmission using a roller chain and adjustable friction clutch. In contrast to the gear‑drive XQB178/8A model, the chain‑drive design allows the operator to shift between high and low gears without stopping the tong – a significant operational advantage when frequent speed changes are required during complex workover jobs. The adjustable friction clutch not only enables shift‑on‑the‑fly operation but also provides essential overload protection, automatically relieving torque when it exceeds safe limits and extending the service life of transmission components.
The two‑speed operation delivers exceptional operational flexibility. High gear at 126 RPM provides 1,763 N·m of torque for efficient running of long pipe strings, while low gear at 27 RPM delivers controlled high‑torque output of 8,100 N·m for breaking out stuck, corroded, or over‑torqued large connections. The built‑in lubricating device ensures sufficient lubrication of all moving parts and maintains an absolute seal, reducing wear and extending component life even under continuous heavy‑duty operation.
The backup tong features hydraulic cylinder clamping for reliable grip while minimizing pipe damage. The high strength safety torque arm provides robust protection against torque reaction during heavy make‑up and break‑out operations. An optional hydraulic spring lift bucket (hydraulic suspension) can be fitted to satisfy any operation position, allowing precise height adjustment on the rig floor for optimal alignment with the pipe string.
Fully hydraulic operation drives both the master and backup tongs, simplifying installation and integration with existing workover rig hydraulic systems. The power requirement of 127 L/min at 14 MPa is a standard workover hydraulic power pack specification, allowing straightforward fit‑up without major modifications to existing rig equipment.
The XQB178/8 is widely used by onshore workover crews and offshore well service contractors, particularly in applications where high reliability, shift‑on‑the‑fly capability, and thread‑protection accuracy are top priorities. Every unit is hydrostatically pressure‑tested and functionally tested prior to shipment.
Optional accessories such as extension guide rods, hydraulic spring lift buckets, and torque control systems are available upon request to expand the operational flexibility and precision of the XQB178/8.
For detailed 2D/3D drawings, operation manual (PDF), spare parts list, or a quotation tailored to your rig’s hydraulic system, please contact us:
Email: info@hyrig.com
We reply within 24 hours with technical datasheets and best pricing.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.