Complete Technical Overview
The TEDA XQ89/3C is a lightweight hydraulic power tong specifically engineered for making up and breaking out 2‑3/8″, 2‑7/8″, and 3‑1/2″ tubing during oilfield well servicing and workover operations. It is an improved new product based on the XQ89/3B hydraulic power tong, incorporating several patented features of China.
This open‑type power tong is driven by a hydraulic motor with low speed and large torque. The Model H manual control valve connects directly to the hydraulic motor, resulting in a compact structure and lightweight design – currently one of the lightest hydraulic power tongs available for well servicing applications. The new‑type hydraulic backup tong and master tong are combined into a single compact unit. Operating the manual control valve of the master tong causes the combined tong to clamp and release simultaneously, simplifying operation and reducing the need for separate controls.
Key Specifications
The following specifications are compiled from manufacturer and distributor data. Torque values may vary slightly between sources due to differences in test methods, system pressure settings, or gear ratio configurations. Please confirm exact specifications with the manufacturer for your specific requirements.
Model: XQ89/3C
Pipe Size Range – Master Tong: 2‑3/8″, 2‑7/8″, 3‑1/2″ (Φ60–89mm)
Pipe Size Range – Backup Tong: 2‑3/8″ – 4‑1/2″ (Φ60–114mm)
High Gear Rated Torque (@10 MPa / 1,450 psi): 1,100 – 1,270 N·m (810 – 937 ft·lbs)
Low Gear Rated Torque (@10 MPa / 1,450 psi): 3,000 – 3,300 N·m (2,210 – 2,434 ft·lbs)
Low Gear Rated Torque (@12.5 MPa / 1,810 psi): 4,000 N·m (2,950 ft·lbs) (peak / max system pressure)
High Gear Rated Speed: 60 – 100 RPM
Low Gear Rated Speed: 23 – 30 RPM
Rated System Pressure: 10 MPa (1,450 psi)
Max. System Pressure: 12.5 MPa (1,810 psi)
Rated / Max. Flow: 80 L/min (21 GPM)
Tong Head Opening: 95mm (3.7″)
Dimensions (L×W×H): 650 – 830 mm × 430 mm × 550 – 555 mm
Master Tong Weight: 105 kg (231 lbs)
Backup Tong Weight: 53 kg (117 lbs)
Combined Tong Weight: 158 – 170 kg (348 – 375 lbs)
Key Features
Inner Curved Roller Climbing and Clamping Mechanism: The tong head uses this patented design, which requires no part changes when making up or breaking out tubing within the 2‑7/8″ and 3‑1/2″ diameter range. This eliminates time‑consuming adjustments during workover operations.
Two‑Speed Gearbox with High and Low Gear Ratio: Two shifts provide high speed at the high gear for efficient pipe running and large torque at the low gear for demanding make‑up or break‑out operations.
Combined Master and Backup Tong with Simultaneous Control: The new‑type hydraulic backup tong and master tong form a combined unit. Operating the manual control valve of the master tong causes the combined tong to clamp and release simultaneously, simplifying operation and reducing the need for separate controls.
Upper Brake Mechanism: The brake mechanism is positioned on the upper part of the tong, making it easy to adjust and repair without extensive disassembly.
Adjustable Torque by Oil Pressure: Adequate torque can be achieved for various steel tubes by adjusting the oil pressure, providing operational flexibility across different connection types and conditions.
Lightweight Compact Design: Driven by a hydraulic motor with low speed and large torque, the Model H manual control valve connects directly to the hydraulic motor, resulting in a compact structure and lightweight design– one of the lightest hydraulic power tongs available for well servicing applications.
Patented Technology: This product has owned several patents of China, reflecting its unique design and manufacturing quality.
Optional Torque Control System: A torque control system can be equipped according to customer requests for precise torque monitoring, display, recording, and control – essential for premium thread applications.
Optional Lengthening Guide Pole Assembly: Choose and buy a lengthening guide pole assembly to allow the backup tong to clamp the tubing body for extended reach operations.
Hydraulic Backup Tong (Standard): The hydraulic backup tong works in conjunction with the master tong to provide secure clamping while minimizing pipe damage.
Frequently Asked Questions
Q: What is the torque range of the TEDA XQ89/3C hydraulic tubing tong?
A: Torque data varies across sources. According to the official TEDA manufacturer page (chinateda.com): low gear rated torque is 3,300 N·m (2,434 ft·lbs) at 23 RPM; high gear rated torque is 1,270 N·m (937 ft·lbs) at 60 RPM. Other distributors (oilbaron, GPE) list low gear torque at 3,000 N·m (2,210 ft·lbs) at 30 RPM and high gear torque at 1,100 N·m (810 ft·lbs) at 100 RPM. At maximum system pressure (12.5 MPa / 1,810 psi), low gear torque can reach 4,000 N·m (2,950 ft·lbs). Both torque levels are suitable for standard 2-3/8″ to 3-1/2″ tubing make‑up and break‑out.
Q: Which pipe sizes does the XQ89/3C cover?
A: The master tong handles 2-3/8″, 2-7/8″, and 3-1/2″ tubing (Φ60–89mm OD). The backup tong extends to 4-1/2″ OD (Φ60–114mm). The tong can also handle 2-3/8″ and 2-7/8″ upset tubing and thick oil tube coupling bodies.
Q: Does the XQ89/3C require part changes when switching between tubing sizes?
A: No. Within the master application range of 2-7/8″ and 3-1/2″ diameter, no part changes are required during make-up or break-out. The inner curved roller climbing and clamping mechanism automatically adjusts to accommodate both sizes.
Q: Is the XQ89/3C suitable for workover operations with limited floor space?
A: Yes. The XQ89/3C is one of the lightest hydraulic power tongs available for well servicing applications, with a combined weight of just 158–170 kg. Its compact structure and direct‑connected manual control valve design make it ideal for rigs with limited floor space.
Q: What hydraulic power unit is required?
A: The XQ89/3C requires a hydraulic power unit delivering 80 L/min (21 GPM) flow at 10 MPa (1,450 psi). Maximum system pressure is 12.5 MPa (1,810 psi). This specification is compatible with most standard workover rig power packs.
Q: What optional accessories are available?
A: Optional accessories include torque control valves, torque control systems for precise torque management, and lengthening guide pole assemblies for extended reach operations. These allow the backup tong to clamp the tubing body when additional reach is required.
Complete Product Introduction for engineers & procurement
The TEDA XQ89/3C hydraulic tubing tong is a lightweight, efficient, and reliable tool for oilfield well servicing and workover operations involving 2-3/8″ to 3-1/2″ tubing. As an improved new product based on the XQ89/3B hydraulic power tong, it incorporates several patented design features that enhance operational efficiency and reduce maintenance requirements. It is widely used in oilfields across China, the Middle East, Southeast Asia, South America, and other regions.
The inner curved roller climbing and clamping mechanism is the distinguishing feature of the XQ89/3C. This innovative design allows operators to switch between 2-7/8″ and 3-1/2″ tubing without changing any parts, saving significant time during workover operations when multiple pipe sizes are encountered on a single job.
The two‑speed gearbox provides operational flexibility: high gear is used for efficient pipe running when torque requirements are low, and low gear delivers higher torque for making up heavy connections or breaking out stuck or over‑torqued tubing. The two shifts change the gear ratio between high speed and high torque, ensuring the most appropriate setting is available for each phase of the workover operation.
The combined master and backup tong design reduces the complexity of the control system. Both tongs are hydraulically driven, and operating the manual control valve of the master tong causes the combined tong to clamp and release simultaneously. This simplifies the operator‘s workload and improves operational safety. The new‑type hydraulic backup tong provides secure clamping while minimizing pipe damage.
The upper brake mechanism is positioned for easy access, allowing adjustments and repairs to be performed quickly without extensive disassembly. This reduces downtime during critical operations, particularly in remote field locations where maintenance facilities are limited.
The lightweight compact design of the XQ89/3C is a significant advantage for workover rigs with limited floor space. The direct‑connected Model H manual control valve eliminates separate hydraulic lines between the valve and motor, reducing the overall footprint and making the unit easier to handle and position on the rig floor.
The adjustable torque control allows operators to set the appropriate torque level for various steel tubes by adjusting the oil pressure. This feature ensures that make‑up torque is appropriate for the specific connection type, reducing the risk of thread damage or under‑torquing. An optional torque control system can be equipped for precise torque measurement, display, recording, and closed‑loop control – essential for premium threads and critical connections.
The XQ89/3C is fully compatible with optional accessories, including lengthening guide pole assemblies. These allow the backup tong to securely clamp the tubing body when the coupling or connection is positioned outside the normal operating range, extending the usable reach of the tong during extended workover operations.
Every unit is recommended to be hydrostatically pressure‑tested and functionally tested before shipment to ensure reliability in the field.
For detailed 2D/3D drawings, operation manual (PDF), spare parts list, or a quotation tailored to your rig’s hydraulic system, please contact us:
Email: info@hyrig.com
We reply within 24 hours with technical datasheets and best pricing.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.