The Teda XQ89/3C hydraulic tubing tong is designed for high‑torque make‑up and break‑out of tubing connections in well servicing and workover operations. The “3C” designation indicates a three‑jaw cam mechanism for improved gripping and centered load distribution. Below are the key technical specifications.
| Parameter | Specification |
|---|---|
| Max Torque (Low Gear) | 6.5 kN·m (57,500 in·lb) |
| Max Torque (High Gear) | 3.0 kN·m (26,500 in·lb) |
| Recommended Hydraulic Pressure | 12 – 14 MPa (1,740 – 2,030 psi) |
| Hydraulic Flow Rate | 50 – 60 L/min (13.2 – 15.8 GPM) |
| Tubing Gripping Range | 60 – 114 mm (2-3/8″ – 4-1/2″) |
| Optional Casing Range | Up to 127 mm (5″) with special dies |
| Speed – High Gear | 40 – 60 RPM |
| Speed – Low Gear | 10 – 20 RPM |
| Total Weight (Main + Back-up) | ~85 kg (187 lbs) |
| Dimensions (L × W × H) | 680 × 380 × 350 mm (26.8″ × 15″ × 13.8″) |
| Motor Type | Low-speed high-torque hydraulic motor |
| Control Valve | Manual directional valve, direct mount |
| Clamping Mechanism | Inner-curve cam roller (3‑jaw), bi-directional |
| Back-up Tong Type | Hydraulic, auto-sync clamp & release |
| Die Change | Snap-in, tool-less |
The Teda XQ89/3C provides excellent torque capacity for tubing connections while maintaining smooth operation and easy portability for workover rigs.
Hyrig supplies all Teda tongs and genuine spares. For technical data, spare parts, or pricing, contact info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.