HYRIG can supply the TSC drilling fluid circulation systems range and its spare parts. The TSC drilling fluid circulation system is a complete solid control solution used for treating drilling fluids on land and offshore rigs.
| Stage | Equipment | Function |
|---|---|---|
| 1 | Shale Shaker (HS Series) | Primary solids removal |
| 2 | Vacuum Degasser (HV Series) | Gas removal |
| 3 | Desander/Mud Cleaner (HD/HMC Series) | Removing 40-74 μm solids |
| 4 | Desilter (HM Series) | Removing 20-40 μm solids |
| 5 | Centrifuge (HCF Series) | Fine solids removal and barite recovery |
| Auxiliary | Mixing Hopper, Shear Pump, Agitator | Mud mixing and maintenance |
The circulation system is built on a modular tank platform. Drilling fluid from the well flows through the shale shaker, degasser, desander, desilter, and centrifuge in sequence. Each stage removes progressively finer solids. Clean mud is then returned to the active system, while separated solids are discharged.
The TSC circulation system is composed of various solid control equipment, tanks, pipelines, and electrical control systems. Because specific part numbers are not detailed in the standard catalog, please contact HYRIG directly for system configuration and component inquiries.
For TSC drilling fluid circulation system design and equipment selection, contact HYRIG: info@hyrig.com