TSC HS Series Shale Shaker | Linear Motion Drilling Shaker
Overview:
The TSC HS series is a line of linear motion shale shakers used as primary solid control equipment to separate drill cuttings from drilling fluids. It features adjustable deck angles (-2° to +8°), a shutter-type splash guard, and quick screen change mechanisms. Available in single, double, and triple configurations with screen areas from 220 to 280 m². HYRIG can supply the TSC HS series and matching spare parts.
The HS shale shaker uses two AC asynchronous vibration motors mounted on the top of the screen deck. The motors transfer vibration directly to the screen. The circulated drilling fluid flows into the feeder and is distributed onto the screen. The larger solid particles are thrown up and forward at a 50° angle and discharged into the collection pit. The smaller particles and fluid pass through the screen into the taper settling tank for the next stage of solid control.
Main replaceable parts for the TSC HS shale shaker include the vibrating motor, screen, springs, rubber gaskets, wedge blocks, and splash-proof cloth. For the complete parts list, see the TSC HS shale shaker parts page.
| Model | Configuration | Motion Type | Suitable For |
|---|---|---|---|
| HS220-3P | Single | Linear | Standard flow |
| HS240-3P (2) | Double | Linear | High flow |
| HS270-3P (3) | Triple | Linear | Very high flow |
| HS270-4P-PTS | Single | Linear | PTS pre-tensioned screen |
Specifications:
FAQ:
Contact Us:
For TSC HS series shale shaker selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.