TSC HMC Mud Cleaner | Desander & Desilter Combination
Overview:
The TSC HMC series is a mud cleaner that integrates a desander, desilter, and shale shaker into one compact unit. It removes solids from 20 to 74 microns and recycles drilling fluids and barites. It can be configured in four modes, including desander + shaker, desilter + shaker, desander + desilter + shaker, and shaker only. Available with 10-inch desanding and 4-inch desilting hydrocyclones. HYRIG can supply the TSC HMC series and matching spare parts.
The TSC HMC mud cleaner uses multi-stage separation. First, the drilling fluid is pumped into the 10-inch desanding hydrocyclones at high pressure, where larger particles (44-74 microns) are separated and discharged onto the shale shaker. The fluid then flows to the 4-inch desilting hydrocyclones to remove finer particles (20-44 microns), which are also discharged onto the shaker. The shale shaker, equipped with a fine mesh screen, further separates the liquid and solids, recycling the valuable drilling fluid and barites back into the system.
Main replaceable parts for the TSC HMC mud cleaner include desanding hydrocyclone cones, desilting hydrocyclone cones, various nozzles, shale shaker screens, springs, and rubber bars. For the complete parts list, see the TSC HMC mud cleaner parts page.
| Combination Mode | Desander | Desilter | Shale Shaker | Use Case |
|---|---|---|---|---|
| Desander + Shaker | Included | Not included | Included | Removing larger particles |
| Desilter + Shaker | Not included | Included | Included | Removing finer particles |
| Desander + Desilter + Shaker | Included | Included | Included | Full multi-stage separation |
| Shaker only | Not included | Not included | Included | Standard screening |
Specifications:
FAQ:
Contact Us:
For TSC HMC mud cleaner selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.