HYRIG can supply the TSC HMC series mud cleaners range and its spare parts. The TSC HMC mud cleaner parts page lists key replacement components for this integrated solids control equipment.
| Part Name | Part No. | Qty | Remarks |
|---|---|---|---|
| Desanding Top Cover | HD10-TSC-01A | 1 | |
| Desanding Big Cone | HD10-TSC-03A | 1 | |
| Desanding Small Cone | HD10-TSC-05A | 1 | |
| Desanding Nozzle | HD10-CH11 | 1 | |
| Desanding Nozzle | HD10-CH12 | 1 | |
| Desanding Nozzle | HD10-CH13 | 1 | |
| Desilting Top Cover | HM04-TSC-01A | 1 | |
| Desilting Cone | HM04-TSC-03A | 1 | |
| Desilting Nozzle | HM04-CH11 | 1 | |
| Desilting Nozzle | HM04-CH12 | 1 | |
| Desilting Nozzle | HM04-CH13 | 1 | |
| Clamp | HDC05-01 | 1 | |
| Clamp | HDC08-01 | 1 | |
| Seal Ring | HDC05-02 | 1 | |
| Seal Ring | HDC08-02 | 1 | |
| Big Spring | HS280-09 | 1 | |
| Small Spring | HS280-01 | 1 | |
| Rubber Gasket | HS280-10 | 1 | |
| Grooved Rubber Bar | HS03-03 | 1 | |
| Grooved Rubber Bar | HS03-02 | 1 | |
| Screen | HS03-08 | 1 | |
| Screen | HS03-07 | 1 | |
| Screen | HS03-06 | 1 | |
| Pressure Gauge | HD00-01 | 1 |
Qty as per parts list; verify against original drawing.
Desilting hydrocyclone cone, part no. HM04-TSC-03A. Made from wear-resistant material. Replace when the thickness decreases by 50%.
Desanding hydrocyclone big cone, part no. HD10-TSC-03A. Used in the 10-inch desanding assembly.
Desanding nozzle, part no. HD10-CH11. Used to adjust the underflow. Other sizes are available under different part numbers.
For TSC HMC mud cleaner spare parts, contact HYRIG: info@hyrig.com