HYRIG can supply the TSC HMC series mud cleaners range and its spare parts. This page provides answers to frequently asked questions about the operation and maintenance of the TSC HMC series mud cleaners.
Q1: What are the four combination modes of the HMC mud cleaner?
A: Desander + Shaker, Desilter + Shaker, Desander + Desilter + Shaker, and Shaker only.
Q2: What is the recommended screen mesh for the shale shaker?
A: The recommended mesh count is 200-325. The minimum is 150.
Q3: How do I adjust the underflow of the desanding hydrocyclone?
A: Replace the nozzle with a larger or smaller size. A wet bottom (liquid and solid mixture) is the ideal condition.
Q4: What should I do if there is no underflow?
A: Check if the nozzle is jammed. Clear the jam or use a bigger nozzle.
Q5: What should I do if the underflow is too dry?
A: The nozzle diameter is too small. Use a bigger nozzle (the maximal nozzle is recommended).
Q6: What kind of grease is used for the Martin motor?
A: Only Kluber Isoflex Topas NB52 lubricant grease is recommended for the Martin motor. Other motors use LGHP2 high temperature grease.
Q7: How often should the motor bearings be lubricated?
A: Change the lubricant every 2000 hours. If the motor shell temperature exceeds 90°C, halve the lubrication cycle for every additional 10°C.
Q8: Does HYRIG supply TSC HMC mud cleaner spare parts?
A: Yes. HYRIG supplies the TSC HMC series mud cleaners and matching spare parts, including desanding cones, desilting cones, nozzles, screens, springs, and rubber bars.
For TSC mud cleaner technical support and spare parts, contact HYRIG: info@hyrig.com