TSC HM Standard Desilter | Drilling Fluid Desilter
Overview:
The TSC HM standard series is a desilter designed to remove fine solids (20-40 microns) from drilling fluids without an integrated shale shaker. It features 4-inch hydrocyclones and a compact structure. Available configurations include 8, 12, 14, and 16 hydrocyclones, with capacities from 160 to 240 m³/h. HYRIG can supply the TSC HM standard series and matching spare parts.
The desilter uses centrifugal force from the hydrocyclones to separate solids. The drilling fluid is fed tangentially into the cyclones at 0.2-0.4 MPa. Heavier particles are thrown to the wall and discharged through the underflow nozzle, while the clean fluid flows upward to the overflow manifold. The separated solids fall into the collecting chute.
Main replaceable parts for the TSC HM standard desilter include the hydrocyclone assembly, clamps, short joints, and collecting chute. For the complete parts list, see the TSC HM standard desilter parts page.
| Model | Hydrocyclone Qty | Shale Shaker | Suitable For |
|---|---|---|---|
| HM-100×12 | 12 | No | Basic desilter operations |
| HM-100×12-C | 12 | Yes | Standard fine solids removal |
| HM-100×14 | 14 | No | Higher capacity basic operations |
| HM-100×14-C | 14 | Yes | Higher capacity with recovery |
Specifications:
FAQ:
Contact Us:
For TSC HM standard desilter selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.