TSC HM Standard Desilter Parts | HM100-02 Cone & HD219 Clamp

2026-10-23 18:37

HYRIG can supply the TSC HM series desilters range and its spare parts. The TSC HM standard desilter parts page lists key replacement components for this fine solids removal equipment without a shale shaker.

Key Facts

  • Series: TSC HM (Standard, no shale shaker)
  • Page type: Spare parts aggregation
  • Covered parts: Hydrocyclone, clamp, short joint, connecting pipe, collecting chute
  • Part numbers: As per TSC HM standard desilter parts list
  • Quantity note: Qty as per parts list; verify against original drawing
  • Supply: HYRIG can supply as a set or individually

Parts Table

Part NamePart No.QtyRemarks
Hydrocyclone (12 qty)HM1001212For HM-100×12
Hydrocyclone (14 qty)HM1001414For HM-100×14
Hydrocyclone (16 qty)HM1001616For HM-100×16
ClampHD2192
ClampHD603
ClampHD1681
Short Jointφ219×10-1002
Short Jointφ168×10-1001
Connecting Pipe (12 qty)HM-10016A-01011For 12 qty model
Connecting Pipe (14 qty)HM-10016A-01011For 14 qty model
Connecting Pipe (16 qty)HM-10016A-01011For 16 qty model
Collecting Chute (12 qty)HM-10012A-211For 12 qty model
Collecting Chute (14 qty)HM-10014A-211For 14 qty model
Collecting Chute (16 qty)HM-10016A-211For 16 qty model
Pressure GaugeYTN-601

Qty as per parts list; verify against original drawing.

Common Spare Parts

Hydrocyclone Cone HM100-02 (#hydrocyclone)

Hydrocyclone cone for HM series, part no. HM100-02. Made from wear-resistant polyurethane. Replace when thickness decreases by 50%.

Clamp HD219 (#clamp)

Clamp for HM series, part no. HD219. Used to secure the short joints and connecting pipes.

Collecting Chute HM-10012A-21 (#chute)

Collecting chute for 12-hydrocyclone model, part no. HM-10012A-21. Collects the discharged solids.

Notes

  • Material, wear limits and replacement intervals are not specified in the parts list; confirm with supplier.
  • Standard fasteners such as bolts, nuts and washers are listed in the complete parts list and are not individually detailed on this page.
  • For the complete parts list, request the TSC HM standard desilter parts list.

Related Pages

Contact

For TSC HM standard desilter spare parts, contact HYRIG: info@hyrig.com

Name:
Message:
Verification code:
Submit
Comment