HYRIG can supply the TSC HM series desilters range and its spare parts. The TSC HM series is a line of solid control equipment used for removing fine solid particles from drilling fluids, utilizing 4-inch hydrocyclones to separate particles sized from 20 to 40 microns.
Key Facts
- Category: Solid Control Equipment
- Series: TSC HM
- Models: HM-100×8, 12, 14, 16 (standard) and HM-100×8-C, 12-C, 14-C, 16-C (with shale shaker)
- Hydrocyclone diameter: 4 inches (100 mm)
- Working pressure: 0.2-0.4 MPa
- Nominal charge/discharge pipe: 6" / 8"
- Hydrocyclone material: Wear-resistant polyurethane elastomer
Model Overview
| Model Type | Available Hydrocyclone Qty | Capacity Range |
|---|
| Standard HM | 8, 12, 14, 16 | 160-240 m³/h |
| HM-C (With Shaker) | 8, 12, 14, 16 | 160-240 m³/h |
Applications
- Removing fine solids (20-40 microns) from drilling fluids
- Treating fluids after the shale shaker in solid control systems
- Recovering barites (HM-C models only)
- Reducing drilling costs and improving efficiency
Related Pages
Contact
For TSC HM series desilter selection and spare parts, contact HYRIG: info@hyrig.com