TSC HM-C Desilter | Desilter with Shale Shaker
Overview:
The TSC HM-C series is a desilter equipped with a shale shaker, designed to remove fine solids (20-40 microns) from drilling fluids. It features 4-inch hydrocyclones and a 0.4 kW explosion-proof vibrating motor with micro-mesh screens. Available configurations include 8, 12, 14, and 16 hydrocyclones, with capacities from 160 to 240 m³/h. HYRIG can supply the TSC HM-C series and matching spare parts.
The desilter uses centrifugal force from the hydrocyclones to separate solids. The drilling fluid is fed tangentially into the cyclones at 0.2-0.4 MPa. Heavier particles are thrown to the wall and discharged onto the shale shaker for further separation, while the clean fluid flows upward to the overflow manifold. The "wet bottom" flow design prevents nozzle clogging.
Main replaceable parts for the TSC HM-C desilter include the hydrocyclone assembly, screen deck, small springs, and collecting chute. For the complete parts list, see the TSC HM-C desilter parts page.
| Model | Hydrocyclone Qty | Shale Shaker | Suitable For |
|---|---|---|---|
| HM-100×12-C | 12 | Yes | Standard fine solids removal |
| HM-100×12 | 12 | No | Basic desilter operations |
| HM-100×14-C | 14 | Yes | Higher capacity fine solids removal |
| HM-100×16-C | 16 | Yes | Maximum capacity with recovery |
Specifications:
FAQ:
Contact Us:
For TSC HM-C desilter selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.