HYRIG can supply the TSC HS series shale shakers range and its spare parts. The TSC HS shale shaker parts page lists key replacement components for this linear motion solid control equipment.
| Part Name | Part No. | Qty | Remarks |
|---|---|---|---|
| Vibrating Motor | HVM-330 | 1 | Standard motor |
| Vibrating Motor | SVX18-77 | 1 | Martin motor |
| Screen | HS03-08 | 1 | For HS series |
| Big Spring | HS280-3P-09 | 1 | |
| Small Spring | HS280-3P-01 | 1 | |
| Rubber Gasket for Big Spring | HS280-3P-10 | 1 | |
| Rubber Gasket for Small Spring | HS280-3P-02 | 1 | |
| Hook Bolt | HS280-P05 | 1 | |
| Wedge Block | HS270-02 | 1 | |
| Draw Bar | HS280-3P-08 | 1 | |
| Grooved Rubber Bar | HS03-02 | 1 | |
| Grooved Rubber Bar | HS03-03 | 1 | |
| Long Rubber | HS270-03 | 1 | |
| Short Rubber | HS03-270-02 | 1 | |
| Splash Proof Device | HSFJ-220 | 1 | |
| Angle Adjusting Device | HSTJ-220 | 1 | |
| Mechanical Jack Assembly | HSTJ-06 | 1 | |
| Centralizer Assembly | HSTJ-01 | 1 | |
| Sliding Pad | HSTJ-01-02 | 1 | |
| Pawl | HSFJ-01 | 1 | |
| Armored Cable | CJPF86-01 | 1 |
Qty as per parts list; verify against original drawing.
Standard vibrating motor for HS series, part no. HVM-330. Requires LGHP2 high-temperature grease.
Big spring for HS series, part no. HS280-3P-09. Supports the vibrating basket.
Hook bolt for screen tensioning, part no. HS280-P05. Used with the quick screen change system.
For TSC HS shale shaker spare parts, contact HYRIG: info@hyrig.com